API 5L X60 X65 X70 PSL1 PSL2 SAW Steel PIPE LSAW

API 5L X60 X65 X70 PSL1 PSL2 SAW Steel PIPE LSAW

LSAW (Longitudinal Submerged Arc Welded), also known as SAWL, is the preferred manufacturing process for large-diameter, high-pressure pipelines requiring high dimensional accuracy and strength. X60, X65, and X70, which are widely used in long-distance transmission and offshore projects.
Send Inquiry

LSAW (Longitudinal Submerged Arc Welded), also known as SAWL, is the preferred manufacturing process for large-diameter, high-pressure pipelines requiring high dimensional accuracy and strength.

X60, X65, and X70, which are widely used in long-distance transmission and offshore projects.

Understanding the Grades: X60, X65, X70

 

The "X" in the grade designation stands for X (minimum yield strength), and the number following it indicates the Minimum Yield Strength (SMYS) in kilopounds per square inch (ksi).

Grade Min. Yield Strength Min. Tensile Strength Typical Application
X60 (L415) 415 MPa (60,000 psi) 520 MPa (75,000 psi) Medium-pressure transmission, moderate wall thickness .
X65 (L450) 450 MPa (65,000 psi) 535 MPa (77,000 psi) High-pressure onshore/offshore pipelines; good balance of strength and weldability .
X70 (L485) 485 MPa (70,000 psi) 570 MPa (82,000 psi) Ultra-high-pressure, long-distance transmission, and arctic conditions

Note: Higher grades (X70) allow for thinner wall thickness at the same pressure, reducing overall project weight and welding costs, though material cost per ton may be higher.

 

Parameter X60 (PSL2) X65 (PSL2) X70 (PSL2)
Yield Strength (MPa) 415 – 565 450 – 600 485 – 635
Tensile Strength (MPa) 520 – 760 535 – 760 570 – 760
Yield Ratio (Max) 0.93 0.93 0.93
Carbon (C) Max 0.0024 0.0024 0.0024
Manganese (Mn) Max 0.014 0.014 1.65% (varies)
Sulfur (S) Max 0.00015 0.00015 0.00015
Phosphorus (P) Max 0.00025 0.00025 0.00025

 

X60 PSL1: Suitable for low-risk, on-land water or gas distribution where cost is the main factor.

X60/X65 PSL2: Ideal for cross-country oil and gas pipelines, high-pressure transmission, and sour service (if ordered with "S" suffix, e.g., X65MS) -7.

X70 PSL2: Required for very high-pressure gas transmission lines (e.g., Class 600 or 900), long-distance offshore flowlines, and Arctic regions requiring exceptional low-temperature toughness

 

Product Specification Levels: PSL1 vs. PSL2

 

PSL2 imposes much stricter chemical, mechanical, and testing requirements than PSL1

Requirement PSL1 (Standard) PSL2 (Enhanced) Why It Matters for the Client
Yield Strength Minimum only Minimum & Maximum Prevents material that is too "hard" or brittle, ensuring ductility .
Tensile Strength Minimum only Minimum & Maximum Ensures uniform performance; critical for high-pressure gas lines.
Y/T Ratio Not specified Max 0.93 Ensures the pipe has enough strain hardening capacity to withstand ground movement or pressure fluctuations .
Charpy Impact Test Not required Mandatory (Body & Weld) Guarantees toughness, especially in low-temperature environments (arctic/offshore) .
Carbon Equivalent (CE) Not specified Maximum limits per grade Ensures better weldability in the field without pre-heating or cracking .
Chemistry (Max S & P) S: 0.030%, P: 0.030% S: 0.015%, P: 0.025% Low impurities increase resistance to corrosion and cracking (HIC/SSC) .
NDT (Non-Destructive Test) Basic Stricter acceptance criteria Guarantees internal soundness of the weld and base material.

Key Features of SAW / LSAW Pipes

 

1.Large Diameter Range: Typically from 16 inches (406 mm) to 60 inches (1,524 mm) or larger, which ERW (Electric Resistance Welded) pipes cannot easily achieve .

2.Heavy Wall Thickness: Capable of wall thicknesses up to 60 mm, making it suitable for deep-water offshore pipelines .

3.High Dimensional Accuracy: The expansion process (after welding) ensures perfect roundness and straightness, crucial for field welding .

4.High Toughness: Due to the plate manufacturing process (TMCP - Thermo-Mechanical Controlled Processing), LSAW pipes offer excellent low-temperature toughness (CVN values) required for X65 and X70 grades.

7810258

LSAW-2
How To Cooperate With Us?

Our address

Rm1406,14th/F No 208, Hongqi Road, Nankai Dist, Tianjin City ,China

Phone Number( whatsApp/Wechat)

+86 16622033809

E-mail

alisa@tjshenzhoutong.com

modular-1

 

 

 

 

Hot Tags: api 5l x60 x65 x70 psl1 psl2 saw steel pipe lsaw, China api 5l x60 x65 x70 psl1 psl2 saw steel pipe lsaw manufacturers, suppliers, factory, steel tube for sewage treatment, steel tube for irrigation, steel tube for drainage, jis standard steel pipe, steel tube for mining, stainless steel pipe option