Products Description
ASTM A500 Grade B is cold-formed carbon steel structural hollow section (HSS), including CHS (round tube), SHS (square tube) and RHS (rectangular tube). Our hot-dipped galvanized A500 Gr.B tubing adopts ERW high-frequency electric resistance welding, with uniform zinc coating for anti-corrosion, widely accepted for North America, Latin America, Southeast Asia structural engineering projects. It balances strength, weldability, bending performance and cost, the most popular structural grade under ASTM A500 standard.
- Standard: ASTM A500 / A500M-20
- Grade: Grade B
- Manufacturing: Cold formed, ERW welded
- Surface: Hot-dipped galvanized (HDG); black bare tube also available
- Zinc coating: 60–85 μm normal, custom heavy zinc ≥85μm available
- Standard length: 5.8m, 6m, 11.8m, 12m; fixed cut length available
- Tolerance: Compliant with ASTM A500 dimensional tolerance
1.Common Export Sizes (CHS Round Galvanized Tube):
| OD mm | Wall Thickness WT (mm) |
|---|---|
| 26.9 (1") | 2.0 / 2.5 / 2.87 / 3.2 |
| 33.7 (1¼") | 2.0 / 2.5 / 3.0 / 3.2 |
| 42.4 (1½") | 2.0 / 2.5 / 3.0 / 3.2 / 3.7 |
| 48.3 (2") | 2.2 / 2.5 / 2.87 / 3.2 / 3.7 / 4.0 |
| 60.3 (2½") | 2.5 / 2.87 / 3.2 / 3.7 / 4.0 / 4.5 |
| 76.1 (3") | 2.5 / 3.0 / 3.2 / 3.7 / 4.0 / 4.5 / 5.0 |
| 88.9 (3½") | 3.0 / 3.2 / 3.7 / 4.0 / 4.5 / 5.0 |
| 101.6 (4") | 3.0 / 3.2 / 3.7 / 4.0 / 4.5 / 5.0 / 5.5 |
| 114.3 | 3.2 / 3.7 / 4.0 / 4.5 / 5.0 / 5.5 / 6.0 |
| 139.7 | 3.5 / 4.0 / 4.5 / 5.0 / 5.5 / 6.0 |
| 168.3 | 4.0 / 4.5 / 5.0 / 5.5 / 6.0 / 7.0 |
| 219.1 | 4.5 / 5.0 / 5.5 / 6.0 / 7.0 / 8.0 |
| 273.0 | 5.0 / 6.0 / 7.0 / 8.0 / 9.0 |
| 323.9 | 6.0 / 7.0 / 8.0 / 9.0 / 10.0 |
| 355.6 | 6.0 / 7.0 / 8.0 / 9.0 / 10.0 |
2. Common Export Sizes (SHS Square Galvanized Tube):
| Size (mm×mm) | Common WT (mm) |
|---|---|
| 20×20 | 1.5 / 2.0 / 2.5 |
| 25×25 | 1.5 / 2.0 / 2.5 / 3.0 |
| 30×30 | 2.0 / 2.5 / 3.0 |
| 40×40 | 2.0 / 2.5 / 3.0 / 3.5 / 4.0 |
| 50×50 | 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 4.5 |
| 60×60 | 2.5 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 |
| 75×75 | 2.5 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 6.0 |
| 80×80 | 3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 6.0 |
| 100×100 | 3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 6.0 / 8.0 |
| 120×120 | 3.5 / 4.0 / 4.5 / 5.0 / 6.0 / 8.0 |
| 150×150 | 4.0 / 4.5 / 5.0 / 6.0 / 8.0 / 10.0 |
| 200×200 | 5.0 / 6.0 / 8.0 / 10.0 / 12.0 |
| 250×250 | 6.0 / 8.0 / 10.0 / 12.0 |
| 300×300 | 8.0 / 10.0 / 12.0 / 14.0 |
3.Common Export Sizes (RHS Rectangular Galvanized Tube):
| Size (mm×mm) | Common WT (mm) |
|---|---|
| 20×40 | 1.5 / 2.0 / 2.5 |
| 25×50 | 2.0 / 2.5 / 3.0 |
| 30×50 | 2.0 / 2.5 / 3.0 / 3.5 |
| 40×60 | 2.0 / 2.5 / 3.0 / 3.5 / 4.0 |
| 40×80 | 2.5 / 3.0 / 3.5 / 4.0 / 4.5 |
| 50×100 | 2.5 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 |
| 60×120 | 3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 6.0 |
| 80×120 | 3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 6.0 |
| 80×160 | 3.5 / 4.0 / 4.5 / 5.0 / 6.0 / 8.0 |
| 100×150 | 4.0 / 4.5 / 5.0 / 6.0 / 8.0 |
| 100×200 | 4.0 / 5.0 / 6.0 / 8.0 / 10.0 |
| 120×200 | 5.0 / 6.0 / 8.0 / 10.0 |
| 150×250 | 6.0 / 8.0 / 10.0 / 12.0 |
| 200×300 | 8.0 / 10.0 / 12.0 /14.0 |
Packing, Marking & Documentation:
-Export packing. Standard practice for OD ≤ 300 mm is hexagonal seaworthy bundles secured with steel strips (typically 8 strips per bundle) and fitted with two nylon slings per bundle for safe handling. Bundles are wrapped with waterproof plastic cloth or tarpaulin. Larger OD product may be shipped in bulk or in open-top bundles according to vessel stowage requirements. Plastic end caps are fitted to protect tube ends during transport.
-Container loading. 20GP and 40HQ containers are loaded to approximately 26 metric tons per 40HQ for galvanized steel pipe. Bundle configuration and piece length are optimized against container internal dimensions.
-Marking. Each bundle is tagged with steel tags showing grade (A500 Gr. A or Gr. B), size, wall thickness, length, heat number, and coating specification. Tube surfaces can be stencil-marked on request.
-Documentation supplied with each shipment:
- Mill Test Certificate (MTC) to EN 10204 3.1 or 3.2, showing heat number, chemical composition, and mechanical properties.
- ASTM A123 coating compliance certificate with coating thickness/weight test results.
- ISO 9001:2015 quality management certificate.
- Third-party inspection reports available on request (SGS, BV, TÜV, LR, etc.).




Technical Specifications
1.Chemical Composition :
| Element | C | Mn | P | S | Cu (if specified) |
|---|---|---|---|---|---|
| ASTM A500 Gr.B | 0.26 | 1.35 | 0.035 | 0.035 | ≥0.20 |
2.Mechanical Properties(ASTM A500 Gr.B) :
| Item | Round CHS | Square / Rectangular SHS/RHS |
|---|---|---|
| Min Yield Strength | 42 ksi (290 MPa) | 46 ksi (317 MPa) |
| Min Tensile Strength | 58 ksi (400 MPa) | 58 ksi (400 MPa) |
| Min Elongation (2" gauge) | 23% | 23% |
| Test requirement | Flattening test, tension test | Flattening test, tension test |
3.Grade A vs. Grade B: Which One to Specify?
The choice between Grade A and Grade B is essentially a strength-versus-formability trade-off.
Grade A offers lower minimum yield strength but better ductility and formability. It is suitable for forming and bending operations and is typically selected for general building frames, fences, railings, signage supports, and agricultural equipment where the design loads do not demand the higher strength of Grade B.
Grade B provides higher yield and tensile strength, making it the default specification for load-bearing structural applications - building columns, bridge components, communication towers, guardrails, trailer frames, and heavy-duty equipment. Its strength-to-weight ratio is superior to A53 pipe, which is its closest commercial alternative.
A key distinction in A500 is that shaped tubing (square and rectangular) carries a higher minimum yield strength than round tubing for the same grade. This reflects the additional cold-working that occurs at the corners of shaped sections during forming.
| Property (minimum) | Gr. A - Round | Gr. A - Shaped | Gr. B - Round | Gr. B - Shaped |
| Yield strength | 33,000 psi (228 MPa) | 39,000 psi (269 MPa) | 42,000 psi (290 MPa) | 46,000 psi (317 MPa) |
| Tensile strength | 45,000 psi (310 MPa) | 45,000 psi (310 MPa) | 58,000 psi (400 MPa) | 58,000 psi (400 MPa) |
| Elongation in 2 in. (50.8 mm) | 25% | 25% | 23% | 23% |
4.Dimensional tolerances (hot-dip galvanized round / shaped tubing):
| Dimension | Tolerance |
| Outside diameter (round) | ±0.5% of nominal OD (commercial); tighter by agreement |
| Wall thickness | ±10% of nominal WT |
| Length | ±20 mm on cut lengths; ±50 mm on random mill lengths |
| Straightness | ≤ 1.5 mm per metre (≈ 1/8 in. × total length in feet ÷ 5, per ASTM A500) |
| Roundness (round) | ≤ 1.0% of nominal OD |
| Squareness of sides (SHS/RHS) | 90° adjacent sides; tolerance per ASTM A500 |
| End squareness | ≤ 2 mm from perpendicular |
| Twist (shaped) | Per ASTM A500 / agreement |
Galvanizing Specification
The zinc coating is applied by hot-dip galvanizing after fabrication in accordance with ASTM A123/A123M, the governing U.S. standard for hot-dip zinc coatings on structural steel products including pipe and tubing.
1.Coating thickness by wall thickness:
ASTM A123 establishes minimum average coating thickness grades based on steel thickness. For pipe and tubing, the practical requirements are:
| Wall thickness range | Minimum average coating thickness | Local minimum (individual specimen) |
| < 3 mm (typical light-wall export tubing) | 45 μm | ≥ 38 μm |
| ≥ 3 mm and < 6 mm | 65–75 μm | per ASTM A123 Table 1 |
| ≥ 6 mm | 75–85 μm | per ASTM A123 Table 1 |
For wall thicknesses below 3 mm - which covers a large share of exported square, rectangular, and light round tubing - 45 μm average / 38 μm local minimum is the baseline requirement. In coating-weight terms, 45 μm corresponds to approximately ≥ 320 g/m². Commercial hot-dip galvanized A500 tubing is frequently supplied in the 300–600 g/m² range depending on the service environment.
2. Coating performance:
The hot-dip process forms a zinc-iron alloy layer that is metallurgically bonded to the steel substrate. This provides two corrosion-protection mechanisms: barrier protection (the zinc physically blocks moisture and oxygen) and cathodic/sacrificial protection (zinc corrodes preferentially at scratches and cut edges, protecting the underlying steel). Under normal outdoor exposure, a properly applied hot-dip coating delivers a service life of 20+ years, and 25–50+ years in favorable environments.
3.Coating options for export:
| Environment | Recommended coating |
| Standard outdoor / general structural | 45 μm (≥ 320 g/m²) |
| Coastal / salt-spray exposure | 65 μm+ |
| Industrial / chemical | 85 μm |
| Buried / immersion / severe marine | 100 μm+ or 600 g/m² minimum |
All upgraded coatings remain compliant with ASTM A123.

Applications
- Building structural frame, steel truss, column & beam for commercial & residential construction
- Fence, guardrail, gate, street light pole, traffic signal pole
- Trailer chassis, container frame, agricultural greenhouse frame
- Warehouse storage rack, support bracket, machinery frame
- Bridge auxiliary structure, platform handrail, marine auxiliary structure
- Solar mounting support system, carport frame
FAQ
Q1: What is the difference between ASTM A500 Gr.B and ASTM A53 pipe?
A: ASTM A500 is for structural hollow section HSS, designed for load-bearing frame structure. ASTM A53 is line pipe for fluid transportation (water, gas). They are not interchangeable for engineering design.
Q2: Can you provide black un-galvanized A500 Gr.B tube?
A: Yes. Black bare A500 Gr.B HSS is available; we also provide pre-galvanized and hot dipped galvanized options.
Q3: What zinc thickness can you offer?
A: Standard HDG: 60–85μm. Heavy galvanized ≥85μm can be customized for coastal high-salt environment.
Q4: What documents will you supply?
A: Mill Test Certificate (MTC), commercial invoice, packing list, bill of lading, CE/ISO certificate; third-party inspection report upon request.
Q5: Is welding easy for A500 Grade B galvanized tube?
A: Good weldability. Remove zinc coating at welding zone before welding to avoid zinc fume and porosity.
Q6: What is MOQ and delivery time?
A: MOQ 1 ton for regular sizes; bulk order ≥25 tons preferred. Standard stock sizes: 7–12 days. Custom sizes: 15–25 days.
Q7: Tolerance of dimension and wall thickness?
A: Strictly follow ASTM A500 tolerance on OD, side dimension, wall thickness, straightness and squareness for square/rectangular.
Q8: Can you cut fixed length, drill holes, bend or fabricate?
A: Yes, we support secondary processing: cut to length, punching, bending, notching, threaded ends per drawing.
Q9: Is this grade accepted in USA / Latin America projects?
A: Yes, ASTM A500 Gr.B is the most widely specified HSS grade for North and South American structural projects, recognized by AISC.
Q10: How to avoid white rust on galvanized tubes during ocean shipping?
A: We can apply passivation + anti-rust oil + waterproof wrapping, keep ventilation inside bundles.
Our address
Rm1406,14th/F No 208, Hongqi Road, Nankai Dist, Tianjin City ,China
Phone Number(whatsApp/Wechat)
+8616622033809
alisa@tjshenzhoutong.com

Hot Tags: astm a500 grade a / grade b galvanized round, square & rectangular tubing, China astm a500 grade a / grade b galvanized round, square & rectangular tubing manufacturers, suppliers, factory, galvanized cased pipe, galvanized centralized pipe, galvanized conduit pipe, galvanized corrosion resistant pipe, galvanized octagonal pipe, galvanized tested pipe


