4×4 Galvanized Square Tube

4×4 Galvanized Square Tube

Product Overview The 4×4 galvanized square tube (approximately 100×100mm section) is a hot-dip galvanized hollow structural steel column engineered for load-bearing applications and long-term outdoor exposure. The zinc coating forms a metallurgical bond with the steel substrate,...
Send Inquiry

Product Overview

 

The 4×4 galvanized square tube (approximately 100×100mm section) is a hot-dip galvanized hollow structural steel column engineered for load-bearing applications and long-term outdoor exposure. The zinc coating forms a metallurgical bond with the steel substrate, providing sacrificial anode protection-even if the surface is damaged, adjacent zinc continues to suppress corrosion creep.

 

Key Advantages

 

1. Robust Zinc Adhesion & Extended Service Life
Produced via a continuous hot-dip galvanizing line, the zinc layer uniformly covers both interior and exterior walls with no bare spots or drips. In general outdoor environments, the coating remains maintenance-free for 30–50 years; in urban or coastal areas, effective protection persists for 15–20 years.

2. Hollow Section with Superior Strength-to-Weight Ratio
For equivalent torsional and bending strength, square hollow sections weigh significantly less than solid steel-simplifying transport and on-site handling while reducing foundation load. The 4×4 format is available in wall thicknesses from 2.0mm to 4.0mm, suiting applications from light columns to medium-duty structural frames.

3. Fabrication-Friendly
The galvanized coating exhibits good ductility, withstanding cutting, punching, and bending without cracking or flaking. Welding is feasible with proper ventilation; post-weld zinc repair on weld zones is recommended to maintain coating integrity.

4. Clean Finish, Paint-Free Option
The hot-dip process yields a bright silver-white surface suitable for exposed architectural applications, eliminating the need for additional painting and shortening project timelines.

 

Typical Applications

 

◆  Building steel columns and frame bracing

◆  Outdoor fence posts and gate frames

◆  Solar mounting structures and greenhouse frames

◆  Scaffolding and temporary grandstand structures

◆  Machinery bases and support members

 

Specifications

 

Item Parameter
Section Size Approx. 100×100mm (4×4 inch)
Wall Thickness 2.0mm – 4.0mm (customizable)
Standard Length 6m / customizable
Material Grade Q235 / Q195 / Q345 available
Zinc Coating Hot-dip galvanized, 200–400 g/m²
Standards GB/T 3094 / ASTM A500 / EN10219

FAQ

 

 

product-470-408

01.Is 4×4 galvanized square tube sold by ton or by piece?

In China, it is typically priced per ton (tax-inclusive, ex-warehouse) with fixed-length delivery; export or small retail orders may be quoted per piece or per meter. Always specify wall thickness, material grade, and whether joint-free is required-these directly affect unit price.

02.How to tell hot-dip galvanized from electro-galvanized?

Hot-dip coating is thick (200–400 g/m²), tightly bonded, and lasts 15–50 years outdoors; electro-galvanized is thin (typically 10–30 g/m²), suitable only for indoor or short-term protection. Request a zinc coating test report from the supplier.

03.What about rust at weld spots?

Welding damages the local zinc layer. After welding, clean the slag and apply zinc-rich primer or cold galvanizing spray to restore corrosion protection.

 

Hot Tags: 4×4 galvanized square tube, China 4×4 galvanized square tube manufacturers, suppliers, factory, galvanized aluminum pipe, galvanized consolidated pipe, galvanized handrail pipe, galvanized jacket pipe, galvanized special order pipe, galvanized welded pipe