Products Description
Q355D is a low-alloy high-strength structural steel grade defined under the Chinese standard GB/T 1591-2018. The designation is read as follows: Q stands for yield strength (Qu), 355 indicates a minimum yield strength of 355 MPa at thickness ≤16 mm, and D denotes the material is qualified against Charpy V-notch impact testing at −20°C. This D-grade impact qualification is the defining feature of Q355D: it maintains reliable fracture toughness in sub-zero service conditions where ordinary carbon steels or lower impact grades (B/C) would be at risk of brittle failure.
When supplied as a seamless pipe, Q355D combines the base metal properties of GB/T 1591 with the dimensional and inspection requirements of the applicable pipe product standard-most commonly GB/T 8163 (fluid transmission), GB/T 9948 (petroleum/petrochemical cracking service), or GB/T 8162 (structural use). The result is a pipe that bridges the gap between commodity carbon steel and costly alloy grades, offering high strength, good weldability, and dependable low-temperature performance for cold-climate and low-temperature process applications.
For international buyers, Q355D is most closely comparable to EN S355J2 (EN 10025-2) and, in low-temperature piping contexts, to ASTM A333 Gr. 6 chemistry and impact philosophy. Dual-certification or MTC cross-referencing against these equivalents is available on request.
1.Chemical Composition (Heat Analysis, %)
| Element | Q355D Requirement (GB/T 1591-2018) |
Typical Export Range |
| C | ≤ 0.18 | 0.14 – 0.18 |
| Si | ≤ 0.50 | 0.20 – 0.40 |
| Mn | 1.00 – 1.70 | 1.20 – 1.60 |
| P | ≤ 0.030 | ≤ 0.025 |
| S | ≤ 0.030 | ≤ 0.020 |
| Nb + V + Ti | ≤ 0.22 (micro-alloying) | 0.02 – 0.12 |
| CEV (IIW) | ≤ 0.45 | 0.36 – 0.43 |
The carbon equivalent (CEV) is capped at 0.45%, which keeps preheat requirements moderate for most wall thicknesses. For CEV ≤ 0.40–0.43, low-hydrogen welding without preheat is generally feasible up to approximately 25 mm thickness, reducing fabrication cost and lead time.
2.Mechanical Properties (Hot-Rolled / Normalized Delivery)
| Wall Thickness (mm) | Yield Strength ReH (MPa, min) | Tensile Strength Rm (MPa) | Elongation A (%, min) | Impact Energy (Charpy V, −20°C, J, min) |
| ≤ 16 | ≥ 355 | 470 – 630 | 21 | ≥ 34 (longitudinal) |
| > 16 – 40 | ≥ 345 | 470 – 630 | 21 | ≥ 34 |
| > 40 – 63 | ≥ 335 | 470 – 630 | 21 | ≥ 34 |
3.Dimensional Tolerances
Under GB/T 8163 / GB/T 8162, typical tolerances for hot-rolled seamless pipe are:
Outside diameter: ±1.0% to ±1.5% (depending on size and tolerance class), with minimum absolute values applied for small diameters.
Wall thickness: ±10% to ±12.5% for hot-rolled pipe; tighter control achievable with cold-drawn or specially negotiated supply.
| OD (mm) | Common Wall Thickness (mm) | Typical Application Focus |
| 57 | 3.5, 4.0 | Small-diameter fluid lines, instrumentation |
| 89 | 4.0, 5.0 | General fluid transmission, structural brackets |
| 108 | 4.0, 5.0 | Process piping, mechanical components |
| 133 | 5.0, 6.0 | Low-temperature fluid lines, support structures |
| 159 | 5.0, 6.0 | Structural tubing, general piping |
| 168 | 6.0, 8.0 | Structural columns, mechanical sleeves |
| 219 | 6, 8, 10, 12, 14, 16 | High-demand size: structural hollow sections, wind-turbine components, bridge elements, low-temp piping |
| 273 | 8, 10, 12, 14, 16, 20 | Heavy structural service, pressure retaining parts |
| 325 | 8, 10, 12, 14, 16, 20 | Large-diameter structural pipe, piling, offshore secondary structures |
| 426 | 10, 12 | Large-diameter structural and low-temperature lines |
| 530 | 10, 12 | Heavy-section structural and fluid-service pipe |
General supply range: OD Φ22 mm to Φ720 mm; wall thickness 2.5 mm to 50 mm; length 6–12 m (random or fixed length, cut-to-length available). For ASTM A333 Gr. 6 / low-temperature equivalent export orders, sizes up to Φ780 mm OD and heavier walls can be sourced against project-specific requirements.
Package & Shipment
Bundled with steel strips, steel saddles, plastic pipe caps at both ends
Large OD loose loading in bulk; small OD bundled; wooden case packing for precision tubes
Shipping mark: Heat No., Grade, OD×WT, Length, Quantity, Net/Gross Weight, Country of Origin, shipping mark as buyer's design
Main loading port: Tianjin, Qingdao, Shanghai


Applications
Q355D seamless pipe is selected where strength and sub-zero toughness are both non-negotiable. The D-grade impact qualification makes it particularly well-suited to the following service environments:
1. Cold-Climate Fluid & Gas Transmission
High-altitude, northern-latitude, and winter-exposed pipelines for process fluids, utilities, and low-temperature media. The −20°C impact guarantee provides a safety margin against brittle fracture during cold starts, depressurization events, and ambient temperature excursions.
2. Structural Hollow Sections & Support Systems
Wind-turbine support structures, outdoor steel frameworks, bridge secondary members, and equipment skids in cold regions. Q355D's higher yield strength relative to Q235 carbon steel allows for reduced wall thickness and overall structural weight at equivalent load capacity, while its toughness protects welded connections in low-temperature service.
3. Petrochemical & Low-Temperature Process Piping
Low-temperature sections of petrochemical plants, LNG and industrial gas facilities, and cold-box/air-separation unit piping where GB/T 9948 or project specifications invoke D-grade or equivalent low-temperature impact requirements. Q355D is frequently specified as a cost-effective alternative to fully alloyed low-temperature steels in the −20°C to −45°C range, depending on design code and wall thickness.
4. Heavy Machinery & Hydraulic Cylinders
Thick-wall Q355D pipe is used for hydraulic cylinder barrels, boom sections, and structural tubulars in construction and mining equipment operating in cold environments. The combination of strength, weldability, and toughness supports both pressure containment and structural integrity.
5. Pressure-Retaining Components & Fittings Stock
Nozzles, small pressure-vessel connections, and pipe spools for cold-service vessels where a D-grade impact-tested material is required by the design code but full low-temperature alloy steel is not warranted.
FAQ
Q1: What is the essential difference between Q355D and Q345D?
Q355D is the current designation under GB/T 1591-2018, which replaced the older Q345 series. The 2018 revision tightened chemical composition limits (notably carbon and residual elements) and aligned impact testing more closely with EN 10025 practice. Q355D is not merely a renamed Q345D-it represents a more tightly controlled and internationally harmonized grade.
Q2: Can you supply Q355D with normalizing (N) delivery?
Yes. Normalized Q355D is available on request. For low-temperature service, thick-wall sections, or projects where the purchaser requires the most consistent impact performance, normalized delivery is strongly recommended. The delivery condition (as-rolled vs. normalized) and impact sampling orientation should be stated explicitly in the purchase order.
Q3: Which international grades are considered equivalent to Q355D?
The closest European equivalent is S355J2 (EN 10025-2). In low-temperature piping specifications, Q355D chemistry and impact philosophy overlap with ASTM A333 Gr. 6, particularly for cold-service piping where impact testing at −20°C to −45°C is required. The closest ASTM structural equivalent is A572 Gr. 50. Dual-certified MTCs (Q355D / S355J2, or Q355D / A333 Gr. 6) can be arranged depending on mill capability and order quantity.
Q4: What is the maximum service temperature for Q355D?
Q355D is not a heat-resistant steel. Its recommended service temperature range is approximately −20°C to 400°C. Above 400°C, yield strength degrades significantly and the material should not be used for pressure-containing high-temperature service. For elevated-temperature applications, a dedicated heat-resistant grade (e.g., 12Cr1MoVG or equivalent) should be specified.
Q5: What is the minimum order quantity (MOQ) and can you customize sizes?
MOQ varies by size and delivery condition. Standard stock sizes in the table above are available from 1 metric ton per size for trial orders. Custom OD, wall thickness, fixed length, beveling, and coating can be accommodated; a minimum production quantity may apply for non-standard dimensions or normalized heat treatment. Please provide the full specification-OD, WT, length, delivery condition, impact test requirement, and destination port-for an accurate quotation.
Q6: What documentation is provided with export shipments?
Standard export documentation includes: Mill Test Certificate (MTC) to EN 10204 3.1, commercial invoice, packing list, certificate of origin, and third-party inspection reports (SGS, BV, or equivalent) upon request. For low-temperature service, the MTC will report the actual Charpy V-notch impact test results at −20°C, including test temperature and absorbed energy.
Our address
Rm1406,14th/F No 208, Hongqi Road, Nankai Dist, Tianjin City ,China
Phone Number(WhatsApp/wechat)
+8616622033809
alisa@tjshenzhoutong.com

Hot Tags: q355d seamless steel pipe, China q355d seamless steel pipe manufacturers, suppliers, factory, seamless api 5l pipe, seamless pipe for chemical industry, seamless pipe for mitigated operation in industry, seamless pipe for monitoring system connection, seamless pipe for tracing system connection, seamless pipe for transfer system connection


