FBE Coated Seamless Steel Tube API 5L X52 PSL2

FBE Coated Seamless Steel Tube API 5L X52 PSL2

Fusion-bonded epoxy (FBE) coatings are thermosetting layers of epoxy resin applied to steel pipes using an electrostatic process, which protects them against corrosion. FBE coating is well known for its anti-corrosion properties over a wide temperature range. It provides a very good bonding with...
Send Inquiry

 

Fusion-bonded epoxy (FBE) coatings
are thermosetting layers of epoxy
resin applied to steel pipes using an
electrostatic process, which protects
them against corrosion. FBE coating
is well known for its anti-corrosion
properties over a wide temperature
range. It provides a very good
bonding with the blasted steel surface.
Manufacturing Capabilities:
Diameterrange           100mm to 3000mm
Pipe length                  Up to 14 m
Coating thickness        Up to 750 microns
Installed capacity        0.5 million sq m/annum
 
 
 

 

41

 

1699437832612
*Typical Properties:
Adhesion test           Rating 1-2
Impact strength         > 1.5 J
Percentage cure      Minimum 95 %
CD radius                3 mm max
Operating temperature     -20℃ to +110 ℃
 
Manufacturing Standards:
• AWWA C 213
ISO 21809-02
• CSA Z 245.20

• Customer Specifications

 

Applications:
• Drinking water pipelines
• Oil and gas pipelines
• Chemical conveyance pipeline
•Process water pipelines
• Waste water pipelines

Technical Analysis: API 5L X52 PSL2 Line Pipe
What Does It Mean?
API 5L: This is the overarching standard issued by the American Petroleum Institute. It specifies the technical delivery conditions for steel pipes used in pipeline transportation systems in the oil, gas, and water industries . Referencing this standard assures buyers of compliance with internationally recognized norms.

X52 (L360): The "X" denotes a pipe grade in the API 5L specification. The number "52" signifies the minimum yield strength of the steel, which is 52,000 psi (or 359 MPa) . In metric terms, this grade is also commonly referred to as L360, where "L" stands for "Line pipe" and "360" represents the minimum yield strength in MPa . This places X52 as a "medium-strength" workhorse grade, ideal for moderate pressures.

which dramatically improves weldability and toughness .

*PSL2 (Product Specification Level 2): This is the critical differentiator for quality and performance. Compared to the base level (PSL1), PSL2 mandates stricter requirements:

-Tighter Chemistry: Limits on elements like carbon, phosphorus, and sulfur are more stringent, which dramatically improves weldability and toughness 

-Controlled Mechanical Properties: Unlike PSL1, PSL2 specifies both a minimum and maximum limit for yield and tensile strength, ensuring predictability and preventing materials that are too brittle or too soft -1.

-Mandatory Testing: PSL2 requires essential tests that are optional for PSL1, most notably Charpy V-Notch (CVN) impact tests to guarantee fracture toughness, especially at low temperatures . It also mandates maximum hardness limits, which is crucial for resistance to Sulfide Stress Cracking (SSC) in sour service .

-Superior Traceability & Non-Destructive Testing (NDT): PSL2 has mandatory traceability and more rigorous NDT requirements.

 

Element X52 PSL2 (max %) X52 PSL1 (max %) Key Insight for PSL2
Carbon (C) 0.24 -1-9 0.28 Lower C = better weldability (less hardening in HAZ).
Manganese (Mn) 1.40 -1-9 1.4 Contributes to strength.
Phosphorus (P) 0.025 -1-9 0.03 Lower P improves toughness.
Sulfur (S) 0.015 -1-9 0.03 Lower S improves ductility and resistance to hydrogen induced cracking (HIC).
CE (IIW) max 0.43 -1-9 Not Specified Carbon Equivalent; a key index for weldability. Lower is better.
Pcm max 0.25 -1-9 Not Specified Another, more precise, weldability index for low-carbon steels.
Mechanical Properties
The specified maximums in PSL2 ensure the material isn't over-engineered in a way that makes it unsafe (e.g., too brittle).
Property X52 PSL2 X52 PSL1 Key Insight for PSL2
Yield Strength 359 - 531 MPa (52 - 77 ksi) 359 MPa min Controlled range ensures predictable performance.
Tensile Strength 455 - 760 MPa (66 - 110 ksi) 455 MPa min Controlled range is vital for design and safety.
Yield/Tensile Ratio 0.93 max Not Specified Prevents the material from having insufficient ductility before failure.
Charpy Impact Mandatory (e.g., 27J min at 0°C for OD≤508mm) Not Required Guarantees toughness, especially for low-temperature applications.
Hardness (Max) 250 HV (lower for sour service) Not Specified Critical for resistance to SSC in wet H2S environments.
 
we are here for you

Lorem ipsum dolor sit amet consectetur adipisicing elit.

write to us
Email:alisa@tjshenzhoutong.com
Address: Rm1406,14th/F No 208, Hongqi Road, Nankai Dist, Tianjin City ,China
WhatsApp/Wechat
+86 16622033809
Contact directly
Phone: 86 16622033809

Hot Tags: fbe coated seamless steel tube api 5l x52 psl2, China fbe coated seamless steel tube api 5l x52 psl2 manufacturers, suppliers, factory, seamless pipe for performance system connection, seamless pipe for sleeve protection, seamless pipe for isolator connection, astm a53 pipe, seamless pipe for control panel connection, seamless pipe for mechanical system connection