Dimensional & Technical Parameters
Outer Diameter: 1/4″ – 36″ (21.3mm – 914mm)
Wall Thickness: SCH 20, 40, 80, 120, 160, XXS (custom available)
Length: Fixed (5.8/6/11.8/12m) or random length
Ends: Plain ends, beveled ends for welding
Surface Treatment: Black bare, oiled, varnish, or galvanized;3LPE;FBE
Heat Treatment:
P5, P9, P11, P22 – Fully annealed or isothermal annealed
P91 – Normalized + tempered
| Grade | Typical Service Temp. | Main Applications |
| P5 | Up to 600°C | Refinery heaters, cracking tubes, high-temp piping |
| P9 | Up to 650°C | High-temp corrosive service, petrochemical |
| P11 | Up to 550°C | Power plant steam lines, boiler headers |
| P22 | Up to 575°C | Superheater tubes, main steam lines |
| P91 | Up to 650°C | Ultra-supercritical power plants, high-efficiency boilers |
|
Item |
Specification |
|---|---|
|
Standard |
ASTM A335 / ASME SA335 |
|
Material Grade |
P1, P5, P9, P11, P12, P22, P91, etc. (customizable according to requirements) |
|
Outer Diameter (OD) |
16mm - 1016mm (1/8 inch - 40 inches), customizable |
|
Wall Thickness (WT) |
2mm - 120mm, nominal wall and minimum wall available |
|
Length |
5.8m, 6m, 11.8m, 12m, or customized (fixed length, random length) |
|
Chemical Composition (Typical, %) |
P1: C 0.10-0.20, Si 0.10-0.50, Mn 0.30-0.80, P≤0.025, S≤0.025, Cr 0.44-0.65, Mo - P5: C≤0.15, Si≤0.50, Mn 0.30-0.60, P≤0.025, S≤0.025, Cr 4.00-6.00, Mo 0.45-0.65 P11: C 0.05-0.15, Si 0.50-1.00, Mn 0.30-0.60, P≤0.025, S≤0.025, Cr 1.00-1.50, Mo 0.45-0.65 P22: C 0.05-0.15, Si≤0.50, Mn 0.30-0.60, P≤0.025, S≤0.025, Cr 1.90-2.60, Mo 0.87-1.13 P91: C 0.08-0.12, Si 0.20-0.50, Mn 0.30-0.60, P≤0.020, S≤0.010, Cr 8.00-9.50, Mo 0.85-1.05, V 0.18-0.25 |
|
Mechanical Properties (Minimum) |
Tensile Strength: 380-585 MPa (varies by grade) Yield Strength: 205-415 MPa (varies by grade) Elongation: ≥30% Hardness: ≤207 HB (after heat treatment) |
|
Heat Treatment |
P5/P9/P11/P22: Full/isothermal anneal, normalize and temper (tempering temp: 650-675℃) P91: Normalize (1040-1080℃) and temper (730-800℃), or quench and temper |
|
Surface Treatment |
Anti-rust oil coating, black paint, 3PE/epoxy powder coating, thermal zinc spraying |
|
Application Temperature Range |
P5: ≤450℃; P9: 450-500℃; P11: 450-550℃; P22: 500-600℃; P91: 550-650℃ |
|
Testing Standard |
Hydrostatic test, ultrasonic test, eddy current test, tensile test, hardness test, impact test |
Main Export Markets
We supply ASTM A335 P-series pipes to customers worldwide, with key markets including:
🌍 Middle East – Saudi Arabia, UAE, Kuwait, Qatar (oil & gas, petrochemical)
🌏 Asia Pacific – India, South Korea, Singapore, Indonesia, Vietnam (power plants, refineries)
🧭 Europe – Germany, Italy, UK, Poland, Netherlands (energy infrastructure, chemical plants)
🌎 North America – USA, Canada, Mexico (power generation, industrial piping)
🌍 Africa – Nigeria, Algeria, Egypt, South Africa (oil & gas, mining, power)
🌎 South America – Brazil, Chile, Argentina (refinery upgrades, thermal power)

Quality Assurance & Certifications
-100% ultrasonic, eddy current, or hydrostatic testing
-Mill test certificate (MTC) as per EN 10204 3.1 / 3.2
-Material traceability from ladle to final product
-Certified to ISO 9001:2015, PED 2014/68/EU, ASME, API
Technical Date
Chemical Composition (Typical, wt%)
| Grade | C | Mn | P | S | Si | Cr | Mo | Others |
| P5 | ≤0.15 | 0.30-0.60 | ≤0.025 | ≤0.025 | ≤0.50 | 4.0-6.0 | 0.45-0.65 | – |
| P9 | ≤0.15 | 0.30-0.60 | ≤0.025 | ≤0.025 | 0.25-1.00 | 8.0-10.0 | 0.90-1.10 | – |
| P11 | 0.05-0.15 | 0.30-0.60 | ≤0.025 | ≤0.025 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 | – |
| P22 | 0.05-0.15 | 0.30-0.60 | ≤0.025 | ≤0.025 | ≤0.50 | 1.90-2.60 | 0.87-1.13 | – |
| P91 | 0.08-0.12 | 0.30-0.60 | ≤0.020 | ≤0.010 | 0.20-0.50 | 8.00-9.50 | 0.85-1.05 | V 0.18-0.25, Nb 0.06-0.10, N 0.03-0.07 |
Mechanical Properties (Typical)
| Grade | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) |
| P5 | ≥415 | ≥205 | ≥30 |
| P9 | ≥415 | ≥205 | ≥30 |
| P11 | ≥415 | ≥205 | ≥30 |
| P22 | ≥415 | ≥205 | ≥30 |
| P91 | ≥585 | ≥415 | ≥20 |
Photos Show


Our cooperative Client










FAQ – Frequently Asked Questions
1. What is the difference between ASTM A106 and A335?
A106 is a carbon steel pipe for high-temp service. A335 is alloy steel (Cr-Mo) with better creep strength and oxidation resistance at high temperatures.
2. Are these pipes suitable for sour service?
Yes, with proper heat treatment and limited hardness, some grades (e.g., P22) can be used in sour service per NACE MR0175. Please consult for specific conditions.
3. Can you provide third-party inspection?
Yes. We accept SGS, BV, TUV, DNV, Intertek, or customer-nominated inspection.
4. What is the delivery time?
Typically 15–30 days for standard sizes, 30–45 days for large quantities or special grades.
5. Do you supply fittings and flanges for the same material?
Yes, we also supply matching A234 WP (for P-grades) fittings and A182 F flanges.
6. Is pre-heating required before welding?
For P5, P9, P22 – yes, preheating is required. For P11, it is recommended. P91 requires strict pre/post-weld heat treatment.
7. Can you customize length and coating?
Absolutely. Custom lengths, beveling, threading, and coatings (zinc, epoxy, etc.) are available.
Our address
Rm1406,14th/F No 208, Hongqi Road, Nankai Dist, Tianjin City ,China
Phone Number(WhatsApp/Wechat)
+86 16622033809
alisa@tjshenzhoutong.com

Hot Tags: astm a335 p5, p9, p11, p22, p91 alloy steel seamless pipe, China astm a335 p5, p9, p11, p22, p91 alloy steel seamless pipe manufacturers, suppliers, factory, seamless pipe for productive operation system connection, carbon steel seamless pipe, seamless pipe for conveyance system connection, seamless pipe for handling system connection, seamless pipe for responded operation system connection, seamless pile pipe


