Products Description
ASTM A210 Gr.A1 (also known as ASME SA210 Gr.A1) is seamless medium carbon steel boiler and superheater tube manufactured to ASTM A210/A210M standard. It is killed carbon steel, supplied in hot-finished or cold-finished condition, widely used for boiler water wall, superheater, economizer, flue tube, stay tube and safe ends in power plant, HRSG and high temperature pressure piping systems. Our ASTM A210 Gr.A1 seamless boiler tubes are fully traceable with mill test certificates, suitable for medium & high temperature and medium pressure service.
Specification & Size Range
| 1 | Standard: ASTM A210 / A210M, ASME SA210, supplementary requirements per ASTM A450 |
| 2 | Grade: Gr.A1 |
| 3 | Type: Seamless tube, Hot Finished / Cold Drawn |
| 4 | Outer Diameter (OD): 12.7mm ~ 127mm (1/2" ~ 5") |
| 5 | Wall Thickness (WT): 0.9mm ~ 12.7mm |
| 6 | Length: Fixed length 6m, random length, or customized cut length as buyer's requirement |
| 7 | Tube End: Plain end, beveled end, threaded end |
| 8 | Tolerance: Dimensional tolerance meets ASTM A450, wall thickness, OD, length straightness controlled strictly |
| 9 | Surface: Black varnish, oiled, pickling, shot blasting as requested |
Material Standard
ASTM A210/A210M covers seamless medium carbon steel boiler tubes, superheater tubes, arch tubes, stay tubes and boiler flues. Steel shall be killed steel. Tubes can be hot finished or cold finished. Cold finished tubes need proper annealing treatment. It is a common boiler tube grade for steam boiler, heat recovery steam generator, different from ASTM A210 Gr.C, ASTM A192, A106 Gr.B.
Chemical Composition (ASTM A210 Gr.A1, wt% Max unless noted)
| Element | Content |
| Carbon (C) | 0.27 max |
| Manganese (Mn) | 0.93 max |
| Silicon (Si) | 0.10 min |
| Phosphorus (P) | 0.035 max |
| Sulfur (S) | 0.035 max |
Mechanical Properties
| Item | Requirement |
| Tensile Strength, min | 415 MPa (60 ksi) |
| Yield Strength, min | 255 MPa (37 ksi) |
| Elongation, min | 30% |
| Hardness, max | 79 HRB |
| Test Standard | ASTM A370 |
Production Process
| 1 | Raw material inspection: Steel billet incoming check, heat number, chemical analysis verification |
| 2 | Piercing & hot rolling / cold drawing: Seamless forming, no welding seam |
| 3 | Heat treatment: Hot finished as rolled; cold finished tube annealing / normalizing |
| 4 | Straightening |
| 5 | Cutting to required length, end facing & beveling |
| 6 | Surface cleaning, shot blasting or anti-rust oil / varnish |
| 7 | Full inspection and testing |
| 8 | Marking, packing, loading Marking content: Standard ASTM A210 Gr.A1, OD*WT, heat number, manufacturer mark, test stamp |
Application
| 1 | Power plant boiler: Water wall tubes, superheater tubes, reheater tubes, economizer tubes |
| 2 | HRSG (Heat Recovery Steam Generator) for gas turbine combined cycle |
| 3 | Industrial steam boiler, fire tube & water tube boiler |
| 4 | Boiler flues, arch tubes, stay tubes and safe ends |
| 5 | Petrochemical plant high-temperature heat exchanger, condenser |
| 6 | Thermal energy station, waste heat recovery system |
| 7 | Pressure piping for medium temperature & medium pressure steam service |
Our Advantages
✅ Strictly follow ASTM A210 / ASME SA210 standard, 100% killed carbon steel ✅ Full size range of ASTM A210 Gr.A1 seamless boiler tube, support custom cutting ✅ Complete test report: MTC EN10204 3.1B, third-party inspection acceptable (SGS, BV, TUV) ✅ Each batch traceable by heat number ✅ Short lead time, stable supply for bulk order and project tender ✅ Professional export packaging: wooden case / bundle with steel strips, seaworthy packing ✅ Support third-party witness test, pre-shipment inspection ✅ We supply directly from factory, competitive price for long-term boiler, power EPC buyers ✅ We can supply alternative grades: ASTM A210 Gr.C, A192, A106 Gr.B, A213 T11/T22 etc.
FAQ
Q: ### Q1: What is the difference between ASTM A210 Gr.A1 and ASME SA210 Gr.A1?
A: A: They are the same material. ASTM A210 is ASTM standard; SA210 is ASME boiler code equivalent standard, widely accepted for power boiler and pressure vessel projects.
Q: ### Q2: Can ASTM A210 Gr.A1 tube work for high pressure superheater?
A: A: It is designed for medium pressure & medium high temperature boiler service. For ultra-high pressure / high temperature superheater, alloy tube like A213 T11, T22 is recommended.
Q: ### Q3: Is A210 Gr.A1 seamless or welded tube?
A: A: **100% seamless tube**, no longitudinal weld seam, this is mandatory requirement of ASTM A210 standard.
Product Show

Contact
we are here for you
Lorem ipsum dolor sit amet consectetur adipisicing elit.
Tel
Number: +86-22-58162536
Hot Tags: astm a210 gr.a1 boiler seamless tube, China astm a210 gr.a1 boiler seamless tube manufacturers, suppliers, factory, seamless pipe for butt connection, seamless pipe for contingency system connection, seamless pipe for door connection, seamless pipe for flange connection, seamless pipe for mechanical system connection, seamless pipe for uninterrupted operation system connection


