S355J2H Square Hollow Section Steel Tube

S355J2H Square Hollow Section Steel Tube

We supply high-quality S355J2H steel tubes (Material 1.0576) conforming to EN 10210 and EN 10219. This grade offers a minimum yield strength of 355 MPa and guaranteed impact resistance of 27J at -20°C, making it ideal for load-bearing structures in harsh environments. We can offer both hot-finished and precision cold-formed options with full EN 10204 3.1 certification, suitable for galvanizing
Send Inquiry

Products Description

 

S355J2H is a hot-finished or cold-formed structural hollow section made from non-alloy and fine-grain steel. It is primarily defined under European standards.

Executed Standards:

EN 10210-1: Hot-finished structural hollow sections (the "H" in the grade often signifies suitability for hot finishing).

EN 10219-1: Cold-formed welded structural hollow sections.

Note for Buyers: While the grade name remains S355J2H, the manufacturing process (Hot-finished vs. Cold-formed) affects the surface finish, dimensional tolerances, and mechanical properties slightly. Always confirm which standard your supplier follows.

1A5BF87FB748B66A03D2889F5EC8A87E1

Square (SHS): 25x25 mm up to 400x400 mm

Rectangular (RHS): 30x20 mm up to 500x300 mm

Wall Thickness: 2.0 mm up to 20.0 mm

Standard Lengths: 6,000 mm, 12,000 mm,or as client request

Surface: Galvanized (hot -dip galvanized); Oil ; Black painting.

We supply high-quality S355J2H steel tubes (Material 1.0576) conforming to EN 10210 and EN 10219. This grade offers a minimum yield strength of 355 MPa and guaranteed impact resistance of 27J at -20°C, making it ideal for load-bearing structures in harsh environments. We can offer both hot-finished and precision cold-formed options with full EN 10204 3.1 certification, suitable for galvanizing

Manufacturing Differences: Hot-Finished vs. Cold-Formed

 

Feature Hot-Finished (EN 10210-1) Cold-Formed (EN 10219-1)
Process Formed at high temperature (above recrystallization temp). Formed at room temperature and high-frequency welded.
Appearance Scale present (scaled surface), rounded corners. Smooth surface, sharper corners.
Tolerances Slightly wider tolerances on dimensions. Tighter dimensional tolerances.
Stress Stress-free due to heat treatment. Residual stresses present but suitable for most structural uses.
Cost Generally higher due to energy costs. More economical for standard sizes.

Dimensional Tolerances (Key for Trading)

When quoting S355J2H square and rectangular tubes, you must specify tolerances. According to EN 10219 (cold formed), the standard tolerances are:

-Side Length (B/H):

< 100 mm: ±1% (min ±0.5mm)

100-200 mm: ±0.8%

200 mm: ±0.6%

-Wall Thickness (T):

T ≤ 5 mm: ±10%

T > 5 mm: ±0.50 mm

- Corner Radius: Approx. 1.6T to 2.4T (for T≤6mm)

-Straightness: Max 0.15% of total length (or 3mm per meter)

Applications & End-Users

S355J2H is a structural grade suitable for heavy-duty and low-temperature environments. Your clients typically use these tubes for:

Construction: Bridges, high-rise buildings, cranes, piling, and stadiums.

Mechanical Engineering: Agricultural machinery, truck trailers, and bus frames.

Renewable Energy: Solar trackers and solar parking structures.

Infrastructure: Scaffolding and formwork.

Quality Control

Element Percentage (%) Max
Carbon (C) ≤ 0.22
Silicon (Si) ≤ 0.55
Manganese (Mn) ≤ 1.60
Phosphorus (P) ≤ 0.030
Sulfur (S) ≤ 0.030
Carbon Equivalent (CEV) ≤ 0.45

Yield Strength 

The yield strength varies depending on the wall thickness (t).

t ≤ 16 mm: ≥ 355 MPa

16 mm < t ≤ 40 mm: ≥ 345 MPa

40 mm < t ≤ 63 mm: ≥ 335 MPa

63 mm < t ≤ 80 mm: ≥ 325 MPa

80 mm < t ≤ 120 mm: ≥ 315 MPa

Tensile Strength

Property Value
Tensile Strength (Rm) 470 – 630 MPa (for thickness >3mm) / 510 – 680 MPa (for thickness ≤3mm) 
Elongation (A) Min. 20% (Longitudinal) 
Impact Toughness (Charpy V-notch) 27 J minimum at -20°C

 

How To Cooperate With Us?

Our address

Rm1406,14th/F No 208, Hongqi Road, Nankai Dist, Tianjin City ,China

Phone Number( WhatsApp/Wechat)

+86 16622033809

E-mail

alisa@tjshenzhoutong.com

modular-1

 

Hot Tags: s355j2h square hollow section steel tube, China s355j2h square hollow section steel tube manufacturers, suppliers, factory, rectangular pipe technical specifications, rectangular pipe meters, rectangular pipe transportation methods, rectangular pipe test reports, rectangular pipe sockets, rectangular pipe packaging solutions