
Square/Rectangular steel tube( Black;black annealed; galvanized)
Size: 10*10mm- 500*500mm
Thickness:0.8mm-60mm
Length: 5.8m/6m/12m....
We offer S355J2H structural hollow sections, manufactured according to EN 10219-1 (cold formed) / EN 10210-1 (hot finished). This is a high-strength steel with a minimum yield strength of 355 MPa and guaranteed impact toughness of 27J at -20°C, ensuring excellent performance for load-bearing structures even in cold environments. It features low carbon content (max 0.22%) for superior weldability. Available in Circular, Square, and Rectular sections, supplied with EN 10204 3.1 Mill Certificates
Grade S355J2H
The designation S355J2H follows a standardized nomenclature defined by the European standards (EN).
S = Structural Steel (used for load-bearing applications) .
355 = Minimum Yield Strength (in MPa). This indicates that the steel has a minimum yield strength of 355 MPa for thicknesses up to 16 mm .
J2 = Impact Test Requirement. This specifies that the material must undergo a Charpy V-notch impact test at a temperature of -20°C, with a minimum average energy absorption of 27 Joules . This is a key selling point for cold-weather applications.
H = Hollow Section. This denotes that the steel is intended for the production of hollow profiles (tubes), distinguishing it from standard plate or sheet grades
Key Standards: EN 10210 vs. EN 10219
When trading S355J2H, you must specify the manufacturing standard, as it defines the production method and tolerances.
| Standard | Full Name | Manufacturing Process | Key Feature for Clients |
| EN 10210-1 | Hot finished structural hollow sections | Hot forming (with or without subsequent heat treatment) | Generally lower residual stresses; often preferred for welding and dynamic loading. |
| EN 10219-1 | Cold formed welded structural hollow sections | Cold forming (welded) | Tighter dimensional tolerances; often more cost-effective for standard sections |
Note: Both standards cover the same S355J2H grade chemistry and mechanical properties, but the dimensional tolerances and delivery conditions differ slightly
Chemical Composition
Chemical
| Element | Percentage (%) | Implication for Trade |
| Carbon (C) | ≤ 0.22 | Low carbon content ensures excellent weldability without preheating in most sections . |
| Silicon (Si) | ≤ 0.55 | Used for deoxidation (killing) of the steel . |
| Manganese (Mn) | ≤ 1.60 | Adds strength and hardness . |
| Phosphorus (P) | ≤ 0.030 | Kept low to maintain ductility. |
| Sulfur (S) | ≤ 0.030 | Kept low to prevent brittleness . |
| Carbon Equivalent (CEV) | ≤ 0.45 | Crucial for welding. This value helps the client determine welding parameters to avoid cracking |
Mechanical Properties
These are the guaranteed values you will certify in your Mill Test Certificate (EN 10204 3.1 or 3.2)
| Strength and Ductility | ||
| Property | Value | Condition |
| Yield Strength (ReH) | ≥ 355 MPa | For wall thickness (T) ≤ 16 mm . |
| ≥ 345 MPa | For T > 16 mm to ≤ 40 mm . | |
| Tensile Strength (Rm) | 470 - 630 MPa | For wall thickness ≥ 3mm to ≤ 40mm . |
| 510 - 680 MPa | For wall thickness < 3mm . | |
| Elongation (A) | ≥ 20% | Minimum percentage after fracture |
| Toughness (Impact Resistance) | |
| Property | Value |
| Test Temperature | -20°C |
| Minimum Impact Energy | 27 Joules (average for 3 specimens, 10x10mm sample) |
Common Applications
Construction: Columns, trusses, frames, piling, scaffolding
Mechanical Engineering: Agricultural machinery, truck/trailer frames, cranes
Renewable Energy: Support structures for solar trackers and carports
Best Selling




we are here for you
Hot Tags: square hollow section tube s355j2h, China square hollow section tube s355j2h manufacturers, suppliers, factory, rectangular pipe brackets, rectangular pipe terminals, rectangular pipe strainers, rectangular pipe storage requirements, rectangular pipe sockets, rectangular pipe valves


