SSAW Spiral Line Pipe For Oil & Gas Pipeline

SSAW Spiral Line Pipe For Oil & Gas Pipeline

SSAW Spiral Line Pipe, also known as Spiral Submerged Arc Welded Pipe, is a high-performance welded steel pipe specially designed for onshore and offshore oil & gas transmission pipelines. It is manufactured by helically forming hot rolled steel coils and adopting double-sided submerged arc welding technology, forming a continuous spiral weld seam. Thanks to rational helical structure, SSAW line pipe owns uniform stress distribution, reliable pressure resistance and excellent toughness, widely adopted for long-distance crude oil, natural gas, petroleum medium transmission trunk lines and gathering pipelines. We supply API 5L PSL1 / PSL2 SSAW spiral line pipe with full third-party inspection, customized anti-corrosion coating and complete MTC documents for global oil & gas EPC contractors, pipeline operators and trading companies.
Send Inquiry

Product Overview

 

We manufacture API 5L PSL1/PSL2 SSAW spiral line pipe for oil and gas transmission pipeline. Large diameter spiral submerged arc welded steel pipe with 3LPE/FBE coating, full UT, hydro test and MTC. Welcome EPC and pipeline contractors for inquiry.

 

Product Specifications

 

1 Standard: API 5L (PSL1, PSL2), ISO 3183, EN 10219, EN 10217, GB/T9711
2 Steel Grade: Grade B, X42, X46, X52, X56, X60, X65
3 Outer Diameter (OD): 219mm – 3620mm (8" – 142")
4 Wall Thickness (WT): 5.0mm – 25.0mm
5 Length: 5.8m, 6m, 11.8m, 12m, 18m; SRL / DRL, customized length available
6 Pipe End: Plain end, beveled end (30° bevel for field welding), with plastic cap protection
7 Anti-corrosion Coating: 3LPE, 3LPP, FBE, internal epoxy coating, coal tar enamel as requested
8 Packing: Bulk packing, steel frame packing, bundled packing for sea shipment

 

Material Standard & Chemical Composition (API 5L Reference, Max. wt%)

 

Grade C Mn P S Si
Grade B 0.24 1.2 0.025 0.015 0.4
X42 0.24 1.3 0.025 0.015 0.4
X52 0.26 1.4 0.025 0.015 0.4
X60 0.26 1.5 0.025 0.015 0.4
X65 0.26 1.5 0.025 0.015 0.4

 

Note: Chemical composition can be adjusted according to project specification and third-party inspection requirement.

 

Mechanical Properties (API 5L Minimum Requirement)

 

Grade Yield Strength (MPa) Tensile Strength (MPa) Elongation Charpy Impact
Grade B 245 415–655 ≥21% Optional
X42 290 415–655 ≥21% ≥27J @ specified temperature
X52 360 460–760 ≥20% ≥27J @ specified temperature
X60 415 485–760 ≥20% ≥27J @ specified temperature
X65 450 530–760 ≥18% ≥27J @ specified temperature

 

Remark: DWTT test available for PSL2 high-grade line pipe for low-temperature service.

 

Production Process

 

1 Raw material incoming inspection: Hot rolled steel coil check for chemical & mechanical test, dimension and surface inspection
2 Strip leveling & edge milling: Ensure strip edge straightness and good welding groove
3 Helical forming: Feed steel strip into forming unit at designed helix angle to form tubular shell
4 Double-sided submerged arc welding: Internal SAW welding first, then external SAW welding with flux protection
5 Weld seam trimming & visual check
6 Hydrostatic pressure test: Each pipe hydro-tested according to API 5L requirement
7 NDT non-destructive testing: 100% UT for spiral weld; RT for T-joint / pipe ends as required
8 Dimension recheck, pipe end chamfering, marking
9 Anti-corrosion coating application (if required)
10 Final inspection, packing, MTC sorting and shipment

 

Application

 

1 Long-distance natural gas transmission pipeline, crude oil & refined oil trunk pipeline
2 Oil & gas gathering network, well site flow lines
3 Underground buried oil and gas pipeline, cross-river / cross-road pipeline section
4 Oil depot, gas station connecting pipeline
5 Low & medium pressure hydrocarbon transmission project for energy industry

 

Products Description



Q: 1: What standard do you use for oil & gas SSAW line pipe?

A: A: Mainly API 5L PSL1 and PSL2, the most widely adopted standard for oil and gas line pipe. We also support EN 10219, ISO 3183 and local project specifications.

Q: Q2: What is the difference between PSL1 and PSL2?

A: A: PSL2 has stricter chemical control, mandatory Charpy impact test, DWTT option and tighter NDT requirement, used for critical oil & gas transmission pipeline. PSL1 is for general medium pressure service.

Q: Q3: What NDT tests will be carried out?

A: A: 100% Automatic Ultrasonic Testing (UT) on spiral weld seam; Radiographic Testing (RT) for T-joint and pipe ends; Every single pipe undergoes hydrostatic pressure test.

Q: Q4: Can you provide anti-corrosion coating for buried gas pipeline?

A: A: Yes. 3LPE / FBE / 3LPP external coating and internal epoxy coating are available, with coating thickness report.

 

Product Show

 

product-601-590

 

Contact

 
we are here for you
write to us
Email: kepia@tjshenzhoutong.com
visiting us
Address: Chenda Road,Daqiuzhuang Town Jinghai County,Tianjin,China.

Tel

Number: +86-22-58162536

Mob/Whatsapp/Wechat: +86-15822996332

 

 

 

 

 

Hot Tags: ssaw spiral line pipe for oil & gas pipeline, China ssaw spiral line pipe for oil & gas pipeline manufacturers, suppliers, factory, cost effective spiral pipe, decorative spiral pipe, drainage spiral pipe, green spiral pipe, tapered spiral pipe, used spiral pipe