ASTM A252 / GB Standard SSAW Spiral Welded Carbon Steel Boiler Tube

ASTM A252 / GB Standard SSAW Spiral Welded Carbon Steel Boiler Tube

Products Positioning Manufactured from hot-rolled steel coils through the Double-Sided Submerged Arc Welding (SSAW) spiral forming process, this pipe meets both ASTM A252 for piling and GB/T 9711 for line pipe service. It serves boiler pressure parts, foundation piling, low-pressure fluid...
Send Inquiry

Products Positioning

 

Manufactured from hot-rolled steel coils through theDouble-Sided Submerged Arc Welding (SSAW) spiral forming process, this pipe meets bothASTM A252 for piling andGB/T 9711 for line pipe service. It serves boiler pressure parts, foundation piling, low-pressure fluid transmission, and structural support. The line employs Lincoln electric welders for single/dual-wire inner and outer SAW, achieving weld penetration ≥1.5 mm, with 100% in-line continuous ultrasonic inspection and per-pipe hydrostatic testing.

 

 

Dimensions & Specifications

 

Item Range
Outer Diameter 219 mm – 3000 mm
Length 6 m – 22 m (custom lengths available)
Grade (ASTM) A252 Gr.1 / Gr.2 / Gr.3
Grade (GB equivalent) Q235B / Q345B / L245M / L290M, etc.

ASTM A252 does not impose a fixed commercial size range; OD and WT are specified by the purchaser per foundation design. General tolerances: OD ±1%, wall not less than 87.5% of nominal. Under GB/T 9711 PSL2, grades such as L245M limit carbon to ≤0.22%, manganese ≤1.20%, and sulfur ≤0.015%, ensuring weldability and toughness from the chemistry level.

 

 

Manufacturing & Quality Control

 

Forming & Welding
Coils are leveled, edge-trimmed, planed, and pre-bent before ambient-temperature spiral forming. Inner and outer welds use Lincoln electric welders for single- or dual-wire SAW with repeatable parameters. A weld-gap control device maintains pipe diameter, misalignment, and gap within the process window. Weld reinforcement is controlled to avoid "saddle-shaped" inner beads and "fish-belly" outer beads.

Non-Destructive Testing
The full spiral weld seam undergoes in-line continuous ultrasonic automatic inspection with real-time marking of indications, achieving 100% NDT coverage. Optional manual UT and X-ray verification are available per order.

End Preparation
Pipe ends are machined as specified. Bevel angles are typically 30°–35°, root face 0.8–2.4 mm, and end squareness within 1.6–3.0 mm depending on diameter-ensuring uniform fit-up and consistent field weld penetration.

 

Standards & Certification Options

 

Standard Scope
ASTM A252 Welded and seamless steel pipe piles
GB/T 9711 Line pipe for petroleum and natural gas industries
API 5L (optional) Line pipe PSL1/PSL2
EN 10219 (optional) Cold-formed welded structural hollow sections

Mill Test Certificates (MTC) accompany every shipment. SGS / BV / third-party inspection available upon request.

 

 

Typical Applications

 

Piling: Building foundation piles, dock piles, bridge support piles (ASTM A252 Gr.2/Gr.3)

Boiler & Pressure Parts: Boiler pressure tubing, low-pressure steam lines, feedwater piping

Fluid Transmission: Water, gas, and oil low-pressure pipelines (GB/T 9711)

Structural: Industrial building columns, conveyor galleries, temporary support structures

Hot Tags: astm a252 / gb standard ssaw spiral welded carbon steel boiler tube, China astm a252 / gb standard ssaw spiral welded carbon steel boiler tube manufacturers, suppliers, factory, black sea spiral pipe, collapsible spiral pipe, grooved spiral pipe, high quality spiral pipe, irrigation spiral pipe, non conductive spiral pipe