API 5L GRB-X70 NACE MR0175 Sour Services H2S HIC Test Seamless Steel Pipe

API 5L GRB-X70 NACE MR0175 Sour Services H2S HIC Test Seamless Steel Pipe

API 5L Seamless Line Pipe (NACE MR0175 / ISO 15156) Oil & Gas Transmission: Suitable for onshore and offshore pipelines containing wet H2S. Refinery Piping: For processing crude oil with high sulfur content. Natural Gas Sweetening Plants: Where amine treatment creates corrosive environments
Send Inquiry
IMG4041

Product Introduction: API 5L Seamless Line Pipe (NACE MR0175 / ISO 15156)

 

We are pleased to offer high-quality API 5L Seamless Steel Pipes, specifically manufactured to meet the stringent requirements of NACE MR0175 / ISO 15156 for Sour Service.

Product Standard: API SPEC 5L (PSL1 & PSL2)

Sour Service Compliance: NACE MR0175 / ISO 15156 (Petroleum and natural gas industries-Materials for use in H2S-containing environments in oil and gas production) .

Manufacturing Type: Seamless (SMLS)

Outer Diameter: 21.3 mm (1/2") to 914 mm (36") and above (hot-expanded) -1-3.

Wall Thickness: SCH 10 through SCH 160, XXS, or specific wall thicknesses up to 60mm .

Length: Single Random Length (SRL), Double Random Length (DRL), or fixed lengths as per client specifications.

Why NACE MR0175?

NACE MR0175 is the international standard for materials resistant to Sulfide Stress Cracking (SSC) and Hydrogen Induced Cracking (HIC) . In environments containing Hydrogen Sulfide (H₂S) -commonly known as "sour service"-standard carbon steel pipes are prone to brittle failure. Our pipes are optimized with strict chemical composition control and hardness limits to ensure safety and longevity in sour oil and gas fields

Chemical Composition (Key Requirements for NACE)

To qualify for NACE MR0175, the steel must have a controlled "Hardness" and specific chemistry. The typical requirements for sour service (PSL2) are stricter than standard PSL1

Element Standard PSL1 (Max) NACE MR0175 (Sour Service) (Max) Impact
Carbon (C) 0.28% 0.21% Reduced to prevent hard spots
Manganese (Mn) 1.40% 1.00% Controlled to prevent segregation
Phosphorus (P) 0.03% 0.02% Tightly controlled for cleanliness
Sulfur (S) 0.03% 0.00% Extremely low for HIC resistance
Hardness (HRC) No specific limit < 22 HRC Critical to prevent SSC

Mechanical Properties (API 5L PSL2)

While the mechanical strength matches standard API 5L grades, the hardness is strictly monitored. Below are the mechanical requirements for common grades:

Grade Yield Strength (MPa) Tensile Strength (MPa) Hardness Requirement (NACE)
X42 / L290 290 - 495 415 - 655 ≤ 22 HRC / 237 HBW
X52 / L360 360 - 530 460 - 760 ≤ 22 HRC / 237 HBW
X60 / L415 415 - 565 520 - 760 ≤ 22 HRC / 237 HBW
X65 / L450 450 - 600 535 - 760 ≤ 22 HRC / 237 HBW
X70 / L485 485 - 635 570 - 760 ≤ 22 HRC / 237 HBW

*Note: The Yield/Tensile ratio for PSL2 sour service pipes is typically capped at 0.93 to ensure ductility

Key Testing & Quality Controls 

To ensure compliance with NACE MR0175, we conduct rigorous non-destructive and destructive testing:

》Hydrostatic Testing: 100% verification.

》Hardness Test: HRC/HB across pipe body, weld (if applicable), and HAZ.

》HIC Test (Hydrogen Induced Cracking): Per NACE TM0284 .

》SSC Test (Sulfide Stress Cracking): Per NACE TM0177 (Method A, B, C, or D) .

》Impact Test (CVN): Mandatory for PSL2 to ensure toughness at specified temperatures.

Applications

Oil & Gas Transmission: Suitable for onshore and offshore pipelines containing wet H2S.

Refinery Piping: For processing crude oil with high sulfur content.

Natural Gas Sweetening Plants: Where amine treatment creates corrosive environments

 

Surface Treatment & Packaging

Surface: Bare, varnished, or anti-corrosion coatings (3PE, FBE) available.

Ends: Beveled ends (BE) for welding, or threaded with couplings.

Packaging: Steel bundles with plastic caps, suitable for sea freight export.

 

Our API 5L NACE MR0175 Seamless Pipes offer the highest level of safety for sour service environments. By combining high-strength API 5L grades with the stringent chemical and hardness controls of NACE MR0175, we provide a reliable solution for critical energy infrastructure.

For inquiries regarding stock availability, mill test certificates (MTC), or specific coating requirements, please contact us.

 

How To Cooperate With Us?

 

Our address

Rm1406,14th/F No 208, Hongqi Road, Nankai Dist, Tianjin City ,China

Phone Number( WhatsApp/wechat)

+86 16622033809

E-mail

alisa@tjshenzhoutong.com

modular-1

 

 

Hot Tags: api 5l grb-x70 nace mr0175 sour services h2s hic test seamless steel pipe, China api 5l grb-x70 nace mr0175 sour services h2s hic test seamless steel pipe manufacturers, suppliers, factory, seamless pipe for truss connection, seamless pipe for tracking system connection, seamless pipe for construction, seamless pipe for reliable operation in industry, seamless pipe for electrical system connection, seamless pipe for efficient operation in industry