API 5L X60M PSL2 LSAW STEEL PIPE External FBE Coating

API 5L X60M PSL2 LSAW STEEL PIPE External FBE Coating

Products Description API 5L X60M PSL2 LSAW steel pipe is a high-strength line pipe manufactured to the American Petroleum Institute specification for pipeline transportation systems. The designation "X60M" indicates a minimum yield strength of 60,000 psi (414 MPa) with a thermomechanically...
Send Inquiry

Products Description

API 5L X60M PSL2 LSAW steel pipe is a high-strength line pipe manufactured to the American Petroleum Institute specification for pipeline transportation systems. The designation "X60M" indicates a minimum yield strength of 60,000 psi (414 MPa) with a thermomechanically rolled (TMCP) delivery condition. PSL2 (Product Specification Level 2) is the enhanced quality level with significantly stricter requirements than PSL1, including tighter chemistry controls (carbon ≤ 0.12%), mandatory Charpy impact testing, maximum strength limits, yield-to-tensile ratio control, and full traceability.

 

The LSAW (Longitudinal Submerged Arc Welded) manufacturing process - also known as DSAW (Double-Sided Submerged Arc Welding) - applies both inside and outside welds, forming a single high-quality weld nugget. This process is specifically designed for large-diameter, thick-wall pipes used in demanding pipeline applications. The X60M grade bridges the gap between mid-strength grades (X42–X52) and high-strength grades (X70, X80), enabling higher operating pressures with thinner wall sections - reducing steel tonnage, welding time, and freight costs for long-distance projects.

Attribute Specification
Standard API 5L (46th Edition, aligned with ISO 3183)
Product Specification Level PSL2
Grade X60M (L415M in ISO notation)
Delivery Condition Thermomechanically rolled (TMCP)
Manufacturing Process LSAW / DSAW (Double-Sided Submerged Arc Welding)
Forming Methods JCOE or UOE
External Coating Single-layer FBE per ISO 21809-2

 

Parameter Range
Outside Diameter (OD) 406 mm – 1,626 mm (16″ – 64″)
Wall Thickness (WT) 6.0 mm – 50 mm
Length 6 m – 12 m standard; up to 18 m available
End Finish Plain ends / Beveled ends (30° bevel)

 

NPS (in) OD (mm) Wall Thickness (mm) Weight (kg/m)
16 406.4 12.7 123.3
20 508 12.7 155.1
24 609.6 14.3 209.9
30 762 15.9 292.5
36 914.4 19.1 421.6
40 1016 19.1 469.5
42 1066.8 22.2 571.6
48 1219.2 22.2 655.4
56 1422.4 25.4 874
60 1524 25.4 937
64 1625.6 28.6 1126.2

 1699438667134

Technical Specifications

1.Chemical Composition (PSL2, Heat Analysis)

Element Maximum % PSL1 Comparison
Carbon (C) 0.0012 PSL1 X60: 0.26% - 54% reduction
Silicon (Si) 0.0045 Not specified for PSL1
Manganese (Mn) 0.016 PSL1 X60: 1.40%
Phosphorus (P) 0.00025 PSL1: 0.030% - stricter
Sulfur (S) 0.00015 PSL1: 0.030% - stricter
Vanadium (V) 0.0005 -
Niobium (Nb) 0.0005 -
Titanium (Ti) 0.0004 -
Carbon Equivalent (CE) ≤ 0.43 Not specified for PSL1

Micro-alloying with Nb, V, and Ti (alone or in combination) is standard for X60 to achieve the required strength without excessive carbon, improving weldability and lowering CE

2 .Mechanical Properties (PSL2, Pipe Body)

Property Requirement
Yield Strength Rp0.2 414–565 MPa (60,000–82,000 psi)
Tensile Strength Rm ≥ 517 MPa (75,000 psi)
Maximum Tensile Strength 758 MPa (110,000 psi)
Yield-to-Tensile Ratio (max) 0.93
Elongation ≥ 20%
Charpy Impact (0°C, full-size) ≥ 27 J (longitudinal) / ≥ 21 J (transverse)
Hardness (general) ≤ 250 HV10 typical
Hardness (sour service) ≤ 22 HRC

PSL2 specifies both minimum and maximum yield strength, ensuring adequate ductility and preventing over-strength issues that can affect field weldability. For subsea or arctic pipelines, drop-weight tear test (DWTT) at -20°C must show ≥ 85% shear area

3 .Toughness Requirements (Transverse Minimum Impact, Pipe Body)

Pipe OD Impact Energy (J)
D ≤ 508 mm 27 (20)
508 mm < D ≤ 762 mm 27 (20)
762 mm < D ≤ 914 mm 40 (30)
914 mm < D ≤ 1219 mm 40 (30)

Values in parentheses are for sub-size specimens where applicable

External FBE Coating

1 Coating Overview

Fusion-Bonded Epoxy (FBE) is a thermosetting powder coating electrostatically applied to pre-heated steel pipe surfaces at temperatures between 180°C and 250°C. Upon contact with the hot substrate, the epoxy powder melts, flows, and chemically reacts to form a solid, continuous film with superior adhesion and barrier properties.

FBE provides excellent adhesion to steel even under prolonged immersion or exposure to aggressive soils. Unlike liquid coatings, FBE contains no solvents, eliminating shrinkage risks and significantly reducing porosity defects. It delivers high resistance to permeation of water, oxygen, and chloride ions - the three main vectors of under-coating corrosion.

2 Coating Specification

Parameter Specification
Standard ISO 21809-2 (single-layer FBE)
Dry Film Thickness (DFT) 350–500 μm (standard)
Application Temperature 180–250°C
Application Method Electrostatic spray
Inspection Standard AMPP SP0188 / ASTM G8
Holiday Detection High-voltage spark test, 100V per 25 μm nominal thickness
DFT Measurement ≥ 4 readings per joint, radially distributed

3 FBE Coating Advantages

  • Superior adhesion - strong chemical and mechanical bond to steel substrate
  • Solvent-free - no VOC emissions, no shrinkage porosity
  • High permeation resistance - barrier against water, O₂, and Cl ions
  • Cathodic disbondment resistance - maintains coating integrity under CP
  • Proven track record - applied on pipelines for more than 50 years

 29209574-9efc-4441-a347-76398ffe5f34

1699438016057

1699438477867

Applications

API 5L X60M PSL2 LSAW pipe with FBE external coating is engineered for demanding service conditions across multiple industries:

Industry Application Why X60M PSL2 FBE
Oil & Gas Transmission Long-distance onshore pipelines, high-pressure gas trunk lines (3–8 MPa) High yield strength enables thinner wall; PSL2 toughness ensures crack arrest; FBE protects against soil corrosion
Offshore & Subsea Export flowlines, risers, platform piping PSL2 mandatory for offshore; FBE suitable for submerged service per ISO 21809-2
Sour Service High H₂S content fields (NACE MR0175 / ISO 15156) Available with HIC/SSC testing; hardness controlled ≤ 22 HRC
Water Transmission High-pressure water mains, penstocks FBE provides potable-water-compatible corrosion protection
CCS / CO₂ Injection Carbon capture and storage pipelines X60M preferred for higher strength at depth; FBE resists CO₂ permeation
Structural / Piling Bridge piers, port foundations, offshore wind monopiles Large diameter and thick wall capability; FBE for marine environments
Mining & Slurry Long-distance mineral concentrate pipelines Wear-resistant thick wall; FBE protects against aggressive soils

LSAW pipe is the standard pipe type for long-distance oil and gas transmission pipelines, water mains, and structural piling when diameters exceed what seamless or ERW can supply

FAQ

Q1: What is the difference between PSL1 and PSL2?

PSL2 has more stringent requirements than PSL1: tighter chemistry controls (especially carbon ≤ 0.12% vs. 0.26% for PSL1), mandatory Charpy impact testing, specified maximum yield strength, carbon equivalent limits (CE ≤ 0.43), yield-to-tensile ratio control (≤ 0.93), and 100% ultrasonic testing of the weld seam. PSL2 also requires full heat-number traceability per MSS SP-25-28.

Decision rule: For any line operating above 100 bar, sour service (H₂S), or offshore, specify PSL2 - not PSL1.

Q2: Why choose LSAW over seamless or ERW pipe?

LSAW pipe is the preferred choice for large-diameter, thick-wall applications (OD > 16″) where seamless and ERW pipes reach their manufacturing limits. The double-sided submerged arc welding process produces a high-integrity weld with excellent mechanical properties. LSAW pipe is produced from cut-to-length steel plate, allowing precise control of chemistry and dimensions.

Q3: What does "X60M" mean?

"X60" indicates a minimum yield strength of 60,000 psi (414 MPa). "M" indicates the delivery condition is thermomechanically rolled (TMCP). The "M" suffix is specific to PSL2 and signifies that the pipe was produced through controlled rolling with micro-alloying, resulting in finer grain structure, improved toughness, and better weldability compared to normalized or as-rolled conditions.

Q4: What is the recommended FBE coating thickness?

For standard transmission pipeline applications, the FBE dry film thickness (DFT) should be 350–500 μm. Special projects may require higher thicknesses. DFT is measured using calibrated ultrasonic or magnetic induction gauges, with a minimum of four readings per joint distributed radially to ensure circumferential uniformity.

Q5: Can this pipe be used in sour service?

Yes, with additional requirements. For sour service (H₂S-containing environments), the pipe must comply with NACE MR0175 / ISO 15156. Additional testing including HIC (TM0284) and SSC (TM0177) may be required. Hardness must be controlled to ≤ 22 HRC. Carbon content should be reduced further, and CE should be kept as low as practicable.

Q6: What testing and documentation is provided?

Every shipment includes:

EN 10204 Type 3.1 or 3.2 mill test certificate

Chemical analysis (heat and product)

Tensile test reports (yield, ultimate, elongation, Y/T ratio)

Charpy V-notch impact test results (3 specimens at project temperature)

Hydrostatic test record (each pipe length tested)

100% ultrasonic testing of weld seam per ASTM E213

Dimensional and visual inspection reports

Third-party inspection available (SGS, BV, TUV, Intertek)

Q7: What is the typical lead time?

Standard orders: 8–12 weeks. Custom grades or coating specifications: 12–16 weeks. Sample pipe available for qualification (MOQ 5 pieces).

Q8: How is the pipe marked and packaged for export?

Pipe ends are stenciled per API 5L with manufacturer, grade (e.g., "5L X60 PSL2"), process (LSAW), heat number, NPS, wall thickness, length, and standard reference year. Color coding per API 5L Annex G: X60 is typically marked with a yellow band-35. Packaging options include hexagonal bundles (1.5–3 tonnes, steel strip binding with plastic end caps) or loose in containers for large-diameter pipe

How To Cooperate With Us?

Our address

Rm1406,14th/F No 208, Hongqi Road, Nankai Dist, Tianjin City ,China

Phone Number( whatsApp/wechat)

+8616622033809

E-mail

alisa@tjshenzhoutong.com

p202608281100161ff05webp

 

 

Hot Tags: api 5l x60m psl2 lsaw steel pipe external fbe coating, China api 5l x60m psl2 lsaw steel pipe external fbe coating manufacturers, suppliers, factory, api 5l lsaw pipe, api standard steel pipe, LSAW Line Pipe, steel tube for pharmaceutical, steel tube for residential design, thick walled steel pipe