Pre-Galvanized Rectangular Steel Tube Q195

Pre-Galvanized Rectangular Steel Tube Q195

Pre-Galvanized Rectangular Steel Tube Q195 100×200mm for Building Support Product Overview This pre-galvanized rectangular hollow section is engineered specifically for building support applications where corrosion resistance, structural reliability, and installation efficiency are...
Send Inquiry

Pre-Galvanized Rectangular Steel Tube Q195 100×200mm for Building Support

 

Product Overview

 

 

2026-11-03 1619422026-11-03 161957

This pre-galvanized rectangular hollow section is engineered specifically for building support applications where corrosion resistance, structural reliability, and installation efficiency are critical. Manufactured from Q195 carbon steel strip, the 100×200mm profile offers an optimal balance of load-bearing capacity and weight, making it a preferred choice for scaffolding systems, temporary support structures, and permanent framing in industrial and commercial construction.

 

Material & Mechanical Properties

 

Q195 is a low-carbon structural steel with a minimum yield strength of 195 MPa and tensile strength ranging from 315 to 430 MPa. Its high ductility (elongation ≥33%) and excellent weldability make it particularly suitable for support applications that may experience dynamic loading or require on-site fabrication. While Q195 has lower strength compared to Q235 or Q345 grades, its superior formability and cost-effectiveness make it ideal for medium-load support members where deflection control is not the primary constraint.

Property Specification
Steel Grade Q195 (GB/T 3091 / ASTM A500 equivalent)
Yield Strength ≥195 MPa
Tensile Strength 315–430 MPa
Elongation ≥33%
Profile Rectangular Hollow Section (RHS)
Dimensions 100mm × 200mm
Wall Thickness Customizable
Length 3–12m (custom cutting available)

 

Corrosion Protection: Pre-Galvanized Advantage

 

The pre-galvanization process applies a zinc coating to the steel strip before the tube is formed and welded. This continuous coil-coating method ensures uniform zinc distribution across the entire surface, including edges and weld zones. For building support applications, the zinc layer (typically 40–150 g/m² for pre-galvanized products) provides essential barrier and sacrificial protection against atmospheric moisture and occasional exposure to the elements.

A key practical benefit of pre-galvanized tube in construction is that cut ends and drilled holes retain cathodic protection from the adjacent zinc coating, preventing localized rust initiation at fabrication points. This eliminates the need for post-cutting touch-up in most indoor and sheltered outdoor support applications, significantly accelerating on-site installation.

Structural Advantages of the 100×200mm Profile

The rectangular configuration with a 2:1 aspect ratio delivers superior bending resistance about the major axis compared to square or circular sections of equivalent weight. This makes the 100×200mm tube particularly effective for:

Horizontal support beams requiring resistance to sagging under distributed loads

Diagonal bracing members where directional stiffness matters

Column applications with eccentric loading conditions

The flat surfaces also facilitate bolted connections, clamp attachments, and welded gusset plates without the need for special contouring, reducing fabrication complexity.

 

Applications in Building Support

 

Application Suitability
Scaffolding ledger beams High - corrosion resistance plus straightness
Formwork support frames High - reusable with minimal maintenance
Mezzanine floor framing Medium - Q195 adequate for light-to-medium loads
Temporary roof supports High - pre-galvanized finish resists site moisture
Equipment mounting frames High - flat surfaces ease attachment

 

Quality & Compliance

 

Our pre-galvanized rectangular tubes are manufactured under ISO 9001 quality management systems and can be supplied with mill test certificates verifying chemical composition and mechanical properties. Products are available to meet GB/T 3091, ASTM A500, or EN 10219 standards as required by project specifications. Standard surface finish is pre-galvanized with optional oiling for extended storage life.

 

Packaging & Delivery

 

Tubes are bundled with steel strapping and wrapped in waterproof material for export shipment. Custom cutting to specified lengths, drilling, and end finishing are available upon request. Typical lead time is 15–25 days depending on order quantity and customization requirements.

2026-11-03 161857
2026-11-03 161919

 

 

 

 

Hot Tags: pre-galvanized rectangular steel tube q195, China pre-galvanized rectangular steel tube q195 manufacturers, suppliers, factory, galvanized blue pipe, galvanized gray pipe, galvanized new pipe, galvanized quantity pipe, galvanized special shaped pipe, Pre Galvanized