ASTM A500 GRC Hot-dip Galvanized Steel Tube
ASTM A500 GRC Hot-dip Galvanized Steel Tube

ASTM A500 GRC Hot-dip Galvanized Steel Tube

Products Description ASTM A500 Grade C hot-dip galvanized steel tube is a cold-formed, electric-resistance-welded (ERW) carbon steel hollow structural section (HSS) that combines the high strength of Grade C with the long-term corrosion protection of hot-dip galvanizing. Grade C is the highest...
Send Inquiry

Products Description

ASTM A500 Grade C hot-dip galvanized steel tube is a cold-formed, electric-resistance-welded (ERW) carbon steel hollow structural section (HSS) that combines the high strength of Grade C with the long-term corrosion protection of hot-dip galvanizing. Grade C is the highest strength grade within ASTM A500 for shaped tubing, offering a minimum yield strength of 50,000 psi (345 MPa) for square and rectangular sections - significantly above the 46,000 psi (315 MPa) typical of Grade B - making it the preferred choice for heavy-load structural applications where weight reduction and durability are both critical.

The tubing is produced to the dimensional and mechanical requirements of ASTM A500/A500M and galvanized in accordance with ASTM A123/A123M (or ASTM A153 for hardware, as applicable). The zinc coating serves as a sacrificial barrier against moisture and atmospheric corrosion, extending service life in outdoor, industrial, and humid environments without the need for frequent repainting.

1.Common Export Sizes (Round / Square / Rectangular HSS):

✅ Round Tube (CHS)
OD: 21.3mm, 26.9mm, 33.7mm, 42.4mm, 48.3mm, 60.3mm, 76.1mm, 88.9mm, 101.6mm, 114.3mm, 139.7mm, 168.3mm, 219.1mm, 273.1mm
Wall thickness: 2.0mm, 2.5mm, 2.75mm, 3.0mm, 3.2mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 6.0mm
✅ Square Tube (SHS)
25×25, 30×30, 40×40, 50×50, 60×60, 75×75, 80×80, 100×100, 120×120, 150×150, 200×200, 250×250, 300×300 mm
Wall thickness: 2.0 ~ 12.0 mm
✅ Rectangular Tube (RHS)
40×20, 50×30, 60×40, 80×40, 80×60, 100×50, 100×60, 120×60, 120×80, 150×75, 150×100, 200×100, 200×150, 250×150 mm
Wall thickness: 2.0 ~ 12.0 mm
✅ Standard Length for Export
6m, 6.4m, 12m; cut-to-length 3m, 4m, 5.8m available.
Ends: Plain cut, deburred; plastic caps optional.

2.Packaging & Shipment

  • Packing: Bundled with steel strips; each bundle tagged with mark (standard, grade, size, heat No., net weight)
  • Marking: Paint marking / laser marking: ASTM A500 Gr.C, size, heat number, origin mark
  • Loading: 20GP / 40GP /40HQ container; max length 12m
  • Documents: Mill test certificate (MTC), packing list, commercial invoice, bill of lading; third-party inspection report (SGS / BV) acceptable

1659604749119

mmexport1763448599790

Technical Specifications

ASTM A500 / A500M, Grade C;

Surface: Hot-dip galvanized (HDG)

Production process: Cold formed + ERW welded (seamless available upon request)

Zinc coating: Average zinc thickness 85–100μm (custom 60–120μm as client requirement, meets ASTM A123)

1.Chemical Composition (ASTM A500 Grade C):

Element Heat Analysis, max % Product Analysis, max %
Carbon (C) 0.23 0.27
Manganese (Mn) 1.35 1.4
Phosphorus (P) 0.035 0.045
Sulfur (S) 0.035 0.045
Copper (Cu),
when copper steel specified, min
0.2 0.18

Grade C maintains a tighter carbon ceiling than Grades A and B (0.23% heat analysis vs. 0.26–0.30%), which supports weldability while preserving the higher strength level.

2.Mechanical Properties (ASTM A500 Grade C):

Section Type Tensile Strength, min Yield Strength, min Elongation, min
Shaped tubing (square / rectangular) 62,000 psi (425 MPa) 50,000 psi (345 MPa) 21% (for 0.120″ wall and over)
Round tubing (CHS) 62,000 psi (425 MPa) 46,000 psi (315 MPa) 21% (for 0.120″ wall and over)

 Note: The yield strength distinction between shaped sections (50 ksi / 345 MPa) and round sections (46 ksi / 315 MPa) is a defining characteristic of ASTM A500 Grade C. Design calculations must use the value corresponding to the section shape specified.

3.Tolerance:

  • Outside dimension: ±0.75%
  • Wall thickness: −10% (standard A500 negative tolerance rule)
  • Length tolerance: +6mm / −0mm for fixed cut length
  • Straightness: ≤0.2% of total length
  • Twist, squareness, end flatness follow ASTM A500

4.Hot-Dip Galvanizing Specification (ASTM A123/A123M):

The zinc coating is applied after fabrication by the hot-dip process. Coating mass and thickness are governed by ASTM A123 Table 1, which specifies minimum average coating grades based on steel thickness. For structural tubing in the wall thickness range common to A500 GRC (typically ≥1/16″ / 1.6 mm), the minimum average coating mass is generally not less than 2.0 oz/ft² (≈610 g/m²) , with no individual specimen falling more than one coating grade below the required minimum average.

In commercial export practice, hot-dip galvanized A500 GRC tubing is frequently supplied with a zinc coating in the range of 200–600 g/m² (approximately 20–85 μm), depending on the purchaser's corrosion-durability requirement and the specific service environment. Heavier coatings (300 g/m² and above) are recommended for outdoor exposed structural work, agricultural environments, and coastal or industrial atmospheres.

5.Quality Control & Inspection:

Checkpoint Standard / Method
Chemical composition Heat analysis + product analysis per ASTM A500
Tensile / yield / elongation Tensile test per ASTM A370
Dimensions & wall thickness Measured at flat centers; ±10% wall tolerance
Zinc coating mass / thickness Magnetic gauge or gravimetric method per ASTM A123
Surface condition Visual: uniform zinc coverage, no bare spots, no uncoated weld zones
Traceability Heat number stamped / stenciled on bundles; MTC correlated to heat

17127411643861659604750072 

Applications

ASTM A500 Grade C hot-dip galvanized tubing is selected where high load-bearing capacity and corrosion resistance must coexist. Its strength-to-weight advantage over Grade B allows lighter sections to carry equivalent loads, reducing dead weight and transportation cost in structural systems.

1.Heavy structural frames
Building columns, beams, and bracing in commercial and industrial structures; bridge components and infrastructure projects requiring minimum yield strength of 50 ksi for shaped sections.

2.Construction equipment & machinery
Crane booms, heavy machinery frames, conveyor gantries, and support structures subjected to significant dynamic or static stress.

3.Transportation
Trailer frames, truck body sub-structures, chassis components, and rail-related support structures where robust yet relatively lightweight hollow sections are required.

4.Energy & industrial infrastructure
Solar mounting structures, power transmission towers, oil and gas platform supports, and industrial plant frameworks exposed to outdoor weathering.

5.Agricultural & municipal
Greenhouse frames, irrigation system supports, street-light poles, traffic-signal gantries, and fencing/guardrail systems where galvanized protection minimizes maintenance in wet, humid, or fertiliser-rich environments.

FAQ

Q1: What is the key difference between ASTM A500 Grade B and Grade C for galvanized tubing?

Grade C delivers higher minimum yield strength - 50,000 psi (345 MPa) for square and rectangular sections vs. 46,000 psi for Grade B - and a minimum tensile strength of 62,000 psi vs. 58,000 psi. Grade C also carries a tighter carbon limit (0.23% heat analysis) to maintain weldability at the higher strength level. For round tubing, both grades show a reduced specified yield (46 ksi for GRC, 42 ksi for GRB) compared with shaped sections.

Q2: Is the galvanizing done before or after cutting and fabrication?

Hot-dip galvanizing is performed after the tube is formed, welded, cut to length, and any end fabrication (e.g., beveling, hole drilling) is completed. This ensures full zinc coverage on cut ends and fabricated details. ASTM A123 is the governing coating standard for the finished fabricated tube.

Q3: What zinc coating thickness is typically supplied for export orders?

Export orders commonly specify zinc coating in the range of 200–600 g/m² (≈20–85 μm) . For general outdoor structural use, 300 g/m² is a frequent benchmark; for more aggressive environments (coastal, industrial, agricultural), 600 g/m² or heavier coatings can be specified. The applicable minimum for ASTM A123 compliance depends on the steel thickness, as defined in Table 1 of that standard.

Q4: Can you supply A500 GRC tubing with custom wall thickness or non-standard lengths?

Yes. While standard export lengths are 6 m and 12 m (with 5.8 m common for container optimization), custom cut lengths and non-standard wall thicknesses within the producible range (approximately 0.5–20 mm depending on section size) are available subject to mill confirmation. Custom sizing should be specified at the inquiry stage so that dimensional tolerances and coating requirements can be aligned.

Q5: What documentation is provided to verify compliance?

Each shipment includes a Mill Test Certificate reporting heat number, chemical composition, and mechanical properties. Upon request, third-party inspection by SGS, BV, or Intertek can be arranged, covering dimensional verification, zinc coating assessment, and surface inspection. This documentation is essential for customs clearance and project QA acceptance in regulated markets.

Q6: Is A500 GRC galvanized tubing suitable for welding after delivery?

Yes, the base steel is carbon steel with weldability appropriate for structural fabrication. However, welding damages the zinc coating in the heat-affected zone. Field or shop welding should be followed by remediation of the coating - typically by zinc-rich paint or a qualified repair procedure per ASTM A780 - to restore corrosion protection at the weld and surrounding area.

How To Cooperate With Us?

Our address

Rm1406,14th/F No 208, Hongqi Road, Nankai Dist, Tianjin City ,China

Phone Number(WhatsApp/Wechat)

+8616622033809

E-mail

alisa@tjshenzhoutong.com

p202608281100161ff05webp

 

 

 

 

 

Hot Tags: astm a500 grc hot-dip galvanized steel tube, China astm a500 grc hot-dip galvanized steel tube manufacturers, suppliers, factory, galvanized aluminum pipe, galvanized custom length tube pipe, galvanized jacket pipe, galvanized metric tube pipe, Galvanized Square Pipe, Pre Galvanized