Products Description
ASTM A53 Type E Grade B Schedule 40
| Property | Description |
| Standard | ASTM A53 |
| Type | Type E – Electric Resistance Welded (ERW) |
| Grade | Grade B – Minimum Yield Strength: 240 MPa, Tensile Strength: 415 MPa |
| Schedule | Schedule 40 – Standard wall thickness for general pressure piping |
| Outer Diameter Range | 21.3 mm – 219.1 mm (NPS 1/2" – 8") |
| Wall Thickness (Example) | 6.02 mm for DN100 (4") pipe |
| Length | Typically 6 meters, or as custom ordered |
| Material Composition | Carbon ≤ 0.30%, Manganese ≤ 1.20%, Phosphorus ≤ 0.035%, Sulfur ≤ 0.035% |
| Surface Finish | Available as Black or Hot-Dip Galvanized (GI) for corrosion resistance |
| Common Applications | Oil & gas pipelines, fire protection systems, industrial fluid transport, structural supports |
| Key Markets | Middle East, North America, Southeast Asia, Africa |
| Advantages | Cost-effective, high production efficiency, standard-compliant, easy to weld and install |
Manufacturing Process
ASTM A53 Type E Grade B Schedule 40 quality assurance:
| Test Item | Testing Requirements | Applicable Scope | Key Standards/Notes |
| Hydrostatic Test | All pipes must undergo hydrostatic pressure test, holding pressure for at least 5 seconds | All seamless and ERW pipes | Ensures leak tightness and structural integrity without leakage or permanent deformation |
| Bending Test | 90° cold bend using a mandrel with diameter 12× the pipe's OD | Pipes ≤ NPS 2 | Weld placed at neutral axis; no cracking allowed |
| 180° Close Coiling Test | Required for applications needing tight coiling | Special-purpose pipes | Verifies ductility for coiling applications |
| Flattening Test | Flatten to 2/3 of original OD, weld alternately at 0° and 90° to force direction | Welded pipes ≥ NPS 2-1/2 | Evaluates weld ductility and bond quality; no cracks permitted |
| Tensile Test | One sample per lot (up to 500 pipes) tested | All production batches | - Min. tensile strength: 60,000 psi (≈415 MPa) |
| - Min. yield strength: 35,000 psi (≈240 MPa) | |||
| Chemical Composition Analysis | Control of C, Mn, P, S content | All grades | Grade B: C ≤ 0.30%, Mn ≤ 1.20% |
| Non-Destructive Electric Testing | Electrical continuity inspection for weld defects | Type E (ERW) pipes | Detects cracks, lack of fusion, or incomplete welds |
Core Advantages
1.Superior Mechanical Performance: With a minimum elongation rate of 25%, the pipe offers excellent ductility and load-bearing capacity, suitable for medium-pressure applications.
2.Cost Efficiency: ERW production technology reduces manufacturing costs by 15-25% compared to seamless pipes, without compromising structural integrity.
3.Versatile Applications: Ideal for transporting water, oil, gas, and steam in municipal systems, fire protection networks, oil and gas pipelines, and industrial machinery.
4.Customization Flexibility: Supports tailored diameters, lengths, and surface treatments to meet project-specific requirements.
5.Corrosion Resistance: Galvanized variants provide long-lasting protection against rust and harsh environmental conditions, extending service life in coastal or desert regions.
Why is ASTM A53 Type E Grade B Schedule 40 steel pipe highly suitable for the Middle East market?
ASTM A53 Type E Grade B Schedule 40 steel pipe is highly suitable for the Middle East market due to its strong alignment with regional standards, engineering demands, and cost-efficiency.
1. Full Compatibility with Regional Standards.
★The Middle East widely adopts ASME/ASTM standards, especially in oil & gas, power, and mega-infrastructure projects.
★ASTM A53 is an internationally recognized carbon steel pipe specification. Type E (ERW), Grade B is a mainstream welded pipe grade directly listed in procurement catalogs of national energy giants like Saudi Aramco and ADNOC.
★The Schedule 40 wall thickness meets standard design requirements for medium- and low-pressure fluid systems, eliminating the need for additional technical justification.
2. Meets Surge in Infrastructure Demand.
Strategic initiatives such as Saudi Vision 2030 and Dubai Urban Plan 2040 are driving massive construction across:
★Municipal water and fire protection networks.
★LNG storage and transportation facilities.
★Industrial park piping systems.
★Green hydrogen pipeline projects.
★These developments require large quantities of weldable, medium-strength, easy-to-install carbon steel pipes-exactly what ASTM A53 Type E delivers.
3. Low Cost, Fast Delivery, and Supply Chain Advantage.
★Compared to seamless pipes (Type S), ERW-produced Type E pipes are 15–25% more cost-effective, making them ideal for bulk procurement.
★Major Chinese steel producers in Tianjin and Hebei can stably supply A53 B Sch40 pipes in DN15–DN300 sizes, supporting large-scale exports.
★With hot-dip galvanizing (GI), the pipe resists corrosion from desert environments-high salinity, extreme heat-significantly extending service life.
4. Mature Logistics and Certification Support.
★Most Middle Eastern buyers accept third-party inspections (e.g., SGS, Bureau Veritas) and are familiar with trade terms like FOB Tianjin Port or CIF Dubai.
★Additional quality certifications such as ISO 9001 or API 5L can further enhance competitiveness and bidding success.
Packing & Loading
Contact
we are here for you
Contact directly
Phone/Whatsapp:
+86-15822996332
Hot Tags: astm a53 type e grade b schedule 40, China astm a53 type e grade b schedule 40 manufacturers, suppliers, factory, erw pipe for roofing systems, erw pipe for irrigation, erw pipe for commercial areas, erw pipe for hangers, erw pipe for greenhouse, erw pipe for bolts
